Why do I get p1353 on my Harley Davidson?
Thanks Those codes could be caused by the PC or a number of other things also like plugs, plug gap, plug wires, loose plug tip where the wire joins on and even bad wiring on the injectors near the plug.
What are the p1353 and p1356 codes?
Codes P1353 and P1356. 1 jaceddie Junior Member. 928. 28. 1. I have a 2004 Ultra that had the 1356 code “Rear cylinder no Combustion EFI” come up last week. Today, the 1353 2 glider Veteran Member. 3 wildspirit97 Guest. 4 jaceddie Junior Member. 5 Fisher Account Removed.
Why is my Harley Davidson engine setting a false code?
Some higher compression engines will set false codes (1353) at higher rpms. If not, replace plugs. This code is set due to faulty ION sensing. Use NGK or OEM plugs. Even though the mileage isn’t high, the age is, and at almost 10 years old, I’d suggest wire replacement as well. Start with plugs. .038-.042″ gap.
Thanks Those codes could be caused by the PC or a number of other things also like plugs, plug gap, plug wires, loose plug tip where the wire joins on and even bad wiring on the injectors near the plug.
What is the Harley Davidson no combustion EFI code?
Discussion in ‘ Electrical ‘ started by jaceddie, Aug 15, 2008 . I have a 2004 Ultra that had the 1356 code “Rear cylinder no Combustion EFI” come up last week. Today, the 1353 code ” Front cylinder no Combustion EFI” started.
Discussion in ‘ Electrical ‘ started by jaceddie, Aug 15, 2008 . I have a 2004 Ultra that had the 1356 code “Rear cylinder no Combustion EFI” come up last week. Today, the 1353 code ” Front cylinder no Combustion EFI” started.
Why does my Softail Deluxe bike run weird?
Mine would do the exact same thing, its a 2007 softail deluxe. It turned out the battery to be the problem. The reason its intermittent is the bike will start running weird in other words it would take a charge but if for some reason that charge did not hold for long the bike will start running weird again.
What does 1353 mean on a Harley Davidson?
Today, the 1353 code ” Front cylinder no Combustion EFI” started. I had a power comander on it until 2 days ago when I disconnected it. It didn’t seem to help the heat problem I installed it for and it really used the gas. The bike seems to run fine. I wonder if this is a problem with the EFI?
What to do if your bike has an error code?
Release the odometer reset button. Turn OFF the ignition switch. Run your bike and shut it down then recheck the DTC’s again by repeating steps 1 to 9. If the code is current it will reappear. 9 – Press and release the odometer reset button to continue to the next module. 10 – Turn Ignition switch to OFF.
What is the p1356 code on a Harley Davidson?
The code is P1356 and the check engine lights comes on and goes off at higher RPMs or under load carry a passenger. Any suggestion as to the problem? jtolson , Apr 2, 2013
Is there an error code for a 2004 Harley?
Re: 2004 harley FLHTCUI i have an error code p1356 rear… I don’t know why my post removed a couple words on its’ own, but, did you check the spark plugs, or better yet change them out to another set of new ones. You can’t post conmments that contain an email address. Aug 02, 2017 | 2000 Harley Davidson FLHTCUI Electra Glide…
How to get a diagnostic code for a Harley Davidson?
The following procedure will instruct in retrieving and clearing ECM Diagnostic Trouble Codes and TSM/TSSM codes through the Harley guage cluster as well as a list of codes. 1- Turn Ignition switchto OFF & Run/Stop switch is to Run.
How to troubleshoot an ICM error code on a Harley?
Speedometer Self Diagnostics: The speedometer is capable of displaying and clearing speedometer, tachometer, TSM/TSSM and ICM/ECM Diagnostic Trouble Codes (DTC). Turn Ignition switch to OFF & Run/Stop switch is to Run. Push odometer reset button in & hold. Turn ignition switch to Ignition and release the odometer reset button.
Today, the 1353 code ” Front cylinder no Combustion EFI” started. I had a power comander on it until 2 days ago when I disconnected it. It didn’t seem to help the heat problem I installed it for and it really used the gas. The bike seems to run fine. I wonder if this is a problem with the EFI?
What to do if you get an error code on your Harley Davidson?
Turn OFF the ignition switch. Run your bike and shut it down then recheck the DTCs again by repeating steps 1 to 9. If the code is current it will reappear. Press and release the odometer reset button to continue to the next module. Turn Ignition switch to OFF.
How to get the ECM code on a Harley Davidson?
The following procedure will instruct in retrieving and clearing ECM Diagnostic Trouble Codes and TSM/TSSM codes through the Harley guage cluster as well as a list of codes. 1- Turn Ignition switchto OFF & Run/Stop switch is to Run. 2- Push odometer resetbutton in & hold. 3- Turnignition switchto Ignition and release the odometer reset button.
How to check engine light on Harley Davidson?
Turn Ignition switch to OFF & Run/Stop switch is to Run. Push odometer reset button in & hold. Turn ignition switch to Ignition and release odometer reset button. Background lighting should illuminate, speedometer needle should sweep its full range and indicator lamps (battery, security, low fuel, check engine and cruise) should illuminate.
How do I get the DTC code on my Harley Davidson?
To get the DTC within an area of diagnostics, push and hold the odometer reset button in for 5 seconds and release. If there are any DTCs the code will be displayed or the word “none” will appear if there are no DTCs.