Where is the timing mark on a Hyundai Accent?
Turn the engine clockwise until the timing mark on the crankshaft sprocket and block are aligned and the camshaft sprocket hole and mark on the camshaft-bearing cap are aligned. There is a dot on the crankshaft sprocket and a corresponding dot on the block at the one o’clock position.
How to replace the rear brakes on a Hyundai Accent?
If the drum is difficult to remove, firmly tap the outer face of the drum with a mallet to loosen it. Do not strike the rim of the drum. Remove the upper return spring by grasping one end of the spring with pliers and unhooking it from the brake shoe. Repeat for the other end of the spring.
How often do you change the timing belt on a Hyundai Accent?
How to Install a Hyundai Accent Timing Belt. Hyundai states the timing belt on an Accent should be changed every 60,000 miles. The timing belt stretches over time and the automatic belt tensioner self-adjusts to keep the belt tight, however, when it reaches its limit of travel it stops as the belt continues to stretch.
When did the Hyundai Accent come out in the US?
Since its debut in the U.S. market in 1995, the Hyundai Accent has steadily established itself as a solid performer in the inexpensive subcompact class. The model design has steadily improved, including significant updates for the 2000 and 2006 model years.
Turn the engine clockwise until the timing mark on the crankshaft sprocket and block are aligned and the camshaft sprocket hole and mark on the camshaft-bearing cap are aligned. There is a dot on the crankshaft sprocket and a corresponding dot on the block at the one o’clock position.
How to Install a Hyundai Accent Timing Belt. Hyundai states the timing belt on an Accent should be changed every 60,000 miles. The timing belt stretches over time and the automatic belt tensioner self-adjusts to keep the belt tight, however, when it reaches its limit of travel it stops as the belt continues to stretch.
Where is the timing mark on a camshaft?
Turn the crankshaft pulley, and align its groove with timing mark “T” of the timing belt cover. Check that the timing mark of camshaft sprocket is aligned with the timing mark of cylinder head cover. (No.1 cylinder compression TDC position) Remove the crankshaft pulley bolt and crankshaft pulley (A).
Do you remove the valve cover on a Hyundai Accent?
If you opt not to remove the valve cover, be sure to mark now the bottom-most portion (opposite the cam timing marks) of the cam sprockets. This will aid you in the installation of the new chain since you will be able to position the sprockets properly even if the timing marks are covered by the valve cover. WARNING!