Where is the override switch on an automatic step?
The magnetic switch is located in the lower portion of the door frame and is triggered when a magnet in the door passes in front of it. If the magnet in the door is not perfectly aligned with the switch in the door frame when the door is closed the step won’t activate. Switch #2 (override switch).
When does a step stop turning the motor?
It will stop turning when it can’t move anymore (i.e. step is fully extended or retracted). The gear linkage has a metal arm that moves the step in and out. When the motor moves the gear, the gear moves the metal arm either in or out which, in turn, moves the step.
What is the trigger for the automatic step?
Automatic steps are triggered by the opening and closing of your entry door (or screen door). There are two switches that control the expanding and retracting of the step. Switch #1 (step trigger) is magnetic. It triggers the step to open when the door is opened and it closes the step when the door closes.
What should the voltage be on an automatic step RV?
Disconnect the power cable from the motor. Then use a multi-meter to check for a DC voltage reading of around 12 volts when the door switch is activated. NOTE: It’s not important whether the voltage is positive or negative. The motor rotates in the reverse direction when the polarity is reversed (negative voltage).
How does a Mercedes Sprinter power step retract?
Now getting in and out of your Sprinter will be easier than ever with automatic retracting power step running boards with LED lighting. Simply open the door to activate the retractable running board, and close the door to tuck it back under your vehicle. The Amp Research step is more than 7 inches wide and includes a textured surface for security.
Are there electric retractable running boards for Mercedes Sprinter?
Step It Up with Passenger and Driver Side Electric Retractable Running Boards Now getting in and out of your Sprinter will be easier than ever with automatic retracting power step running boards with LED lighting.
How big is the AMP Research step on a Mercedes Sprinter?
The Amp Research step is more than 7 inches wide and includes a textured surface for security. Convenient LED lighting adds another level of safety. Passenger side step is 79″. Driver door step is 25″ (if van is equipped with *Heat Booster option step will be 44″). Hardware and wiring harness included.
How does DC motor work on Roadtrek sprinter?
The actuator retracts when you open the side door, and extends when you shut it. Swapping the wires fixed the problem. DC motors are all the same – reverse the current flow and they move in the opposite direction. This is how your van’s window motors work.