Where is the fuel filter on a 1985 Toyota 4runner?
It’s on the passenger side of the engine block under the intake plenum.
Where is the fuel filter on a 1985?
If the fuel filter is there, it’s on top of the tank, near the front, just forward of the filler connection. Look thru the wheel arch, lift up the rubber fender liner, you should be able to see it. If it’s not there, then the PO removed it.
Do fuel injected vehicles have fuel filters?
Most modern vehicles with fuel-injection systems use filters rated between 10 and 30 microns.
Where is the fuel filter on a Toyota 4Runner?
However, the Toyota engineer who located the fuel filter on the truck/4Runner certainly had a robust sense of humor: the filter is located on the passenger side inner frame rail right at the rear torsion bar mount. Never mind that there’s 18″ of open frame rail just behind this location….. Well, I guess it is well-protected when wheeling.
When to replace fuel filter on Toyota truck?
This is another time I love having a body lift. An infrequent maintenance item on the Toyota truck 3.0L V6 involves replacing the fuel filter, just as one would do on any engine as the mileage starts to increase.
How do you replace a filter on a Toyota Camry?
Here, the filter and its bracket are removed. The new Toyota filter includes the mounting bracket. Once the lines are removed, use the 12mm socket to remove the two bolts that locate the filter assembly on the frame rail. The old filter assembly can be removed, and the new one put in place.
How do you change the fuel filter on a banjo?
Hold the 17mm nut on one end, the filter with an open end wrench, and then use a 14mm socket to loosen the banjo fitting. It will be tight with little room to work. Fuel will leak when the fitting is loosened. Then, do the same to the other end of the filter. Access mounting bolts from the passenger wheel well.