Where is the drain plug on a Harley Davidson Sportster?
Locate the drain bolt (underneath the clutch on the bottom side of the chaincase) and remove it with a 5/8′ socket or wrench. Clean any material from the magnetic tip of the drain plug.
How do you change oil in a Sportster?
This will help the oil to drain completely. Remove the Sportster transmission oil drain plug using a 5/8 wrench and let the oil drain from the transmission. It is recommended that the motorcycle be straight and level and not leaning on the jiffy stand to ensure complete draining.
Where is the drain plug on a Jetta FSI?
[On the 2007 Jetta V 2.0T FSI the oil pan drain plug is located on the rear side of the oil pan.] Allow the oil to drain from the engine into the oil drain pan container. While the oil is draining, inspect the oil pan drain plug and sealing washer.
How does the oil drain work on a Harley Davidson?
Unlike most vehicles, the Harley Sportster Evolution Engine has an oil drain tube, not a plug. This tube is attached by a house clamp to a nipple welded to the frame. Loosen the house clamp with a Flathead Screwdriver. Do not remove the tube until you have your drain pan in position.
Locate the drain bolt (underneath the clutch on the bottom side of the chaincase) and remove it with a 5/8′ socket or wrench. Clean any material from the magnetic tip of the drain plug.
Unlike most vehicles, the Harley Sportster Evolution Engine has an oil drain tube, not a plug. This tube is attached by a house clamp to a nipple welded to the frame. Loosen the house clamp with a Flathead Screwdriver. Do not remove the tube until you have your drain pan in position.
How to do an oil change on a Harley Davidson Sportster?
Using your funnel, slowly pour 3 quarts of oil into your oil tank. Although the Evolution engine holds up to 3.5 quarts after a rebuild or when filled new, only 3 get replaced during the oil change. Use the oilcap/dipstick to check your engine oil level (holding the bike level if you have been working with your side-stand).
Where is the oil filter on a sportsterpedia?
Click Here to reference External Oil Filters in the REF section of the Sportsterpedia. Oil feed from the tank is on the top of the case behind the rear cylinder (rear fitting). Oil return to the tank is on the top of the case behind the rear cylinder (front fitting).