Where does the brake wire go on a Silverado 2500?
For your 2011 Chevy Silverado 2500 with integrated brake controller, the brake output wire will run directly from your controller to the 7-way. You can test the 5 o’clock pin of your connector for braking function using an incandescent tester like # PTW2993.
Why does my Chevy Silverado 2500HD stop working?
I have a 2011 Chevrolet Silverado 2500HD equipped with the factory integrated trailer brake control system. The trailer brakes have stopped working. Im trying to diagnose the cause. Used a tester at the truck plug in the bumper. turn signals, reverse light, and brake lights work but I have no output on the trailer brake output line.
Is there a problem with the ITBC trailer brake controller?
1st things first, you must have a TRAILER CONNECTED’ message before ItBC will work. Also, no ABS light on the instrument panel. If either of these are problem, no trailer brakes. It the message you receive says SERVICE TRAILER BRAKE SYSTEM, the problem is in the truck, not the trailer, 95% or more certain.
Can a service trailer brake system be a problem?
If either of these are problem, no trailer brakes. It the message you receive says SERVICE TRAILER BRAKE SYSTEM, the problem is in the truck, not the trailer, 95% or more certain. One problem area is the brake stoplight switch. If doesn’t understand that you are stepping on the brakes (based on the brake switch), ITBC will produce no braking.
What kind of brake controller does a GMC 2500HD have?
My truck is a 2015 GMC 2500hd with integrated brake controller Test truck is a 2006 chevy with an aftermarket brake controller When hooked to test truck brakes and lights work fine When hooked to my truck there are no brakes but lights seem fine Have had truck to dealer and they say there is nothing wrong with it Where should I go now?
Where to install P3 brake controller in 2015 GMC Sierra 2500?
In your 2015 Sierra 2500 the P3 can be installed simply, using the custom wiring adapter # 3016 that plugs in under the dash. If you do not have an EOH actuator, but instead have standard electric drum brakes, then you’ll want to do some testing on your Sierra to determine if the brake signal is reaching its 7-way trailer connector.
How to troubleshoot brake controller on 2015 GMC?
Apply the grounded tester to the brake circuit contact at the 5-o-clock position while a helper presses the brake controller manual override (with the controller set to maximum output). You should detect the controller’s output signal on the contact.
I have a 2011 Chevrolet Silverado 2500HD equipped with the factory integrated trailer brake control system. The trailer brakes have stopped working. Im trying to diagnose the cause. Used a tester at the truck plug in the bumper. turn signals, reverse light, and brake lights work but I have no output on the trailer brake output line.