Where do you find the throttle linkage on a Honda Accord?
Step 2: Locate the throttle linkage. Before you can make any adjustments, you will need to locate the throttle valve adjustment location and the throttle linkage. Pop the hood and look for the intake piping. Follow the piping to the intake itself. You will find a series of linkages and cables mounted on the intake.
How do you adjust the throttle valve cable?
Tip: Consult the owner’s manual for any specifications for your car’s make and model. Adjust the cable by a small increment then have your helper press the gas pedal all the way down and check the cable at WOT. Lengthening the cable will allow the vehicle to shift earlier and the shift will be softer.
How does the throttle cable work in a car?
The throttle cable connects the throttle body of your engine to the accelerator pedal in the passenger compartment. When you press on the accelerator, the cable opens the valve inside the throttle body to allow more air to be drawn in.
Can a bad throttle sensor be replaced on a Honda Civic?
Honda has not made it easy to replace only a bad throttle position sensor, instead choosing to fasten it down with semi-permanent screws in many older models. While many people will simply replace the entire throttle body, this is obviously not necessary.
Step 2: Locate the throttle linkage. Before you can make any adjustments, you will need to locate the throttle valve adjustment location and the throttle linkage. Pop the hood and look for the intake piping. Follow the piping to the intake itself. You will find a series of linkages and cables mounted on the intake.
Tip: Consult the owner’s manual for any specifications for your car’s make and model. Adjust the cable by a small increment then have your helper press the gas pedal all the way down and check the cable at WOT. Lengthening the cable will allow the vehicle to shift earlier and the shift will be softer.
How is the throttle cable disconnected from the accelerator pedal?
Step 3: Pull the throttle cable through the firewall. Pull the new cable from the engine compartment into the interior. Step 4: Disconnecting the throttle cable from the accelerator pedal. Typically, the throttle cable is disconnected from the accelerator pedal by lifting up on the pedal and sliding the cable through the slotted hole.
How do you adjust the throttle grip on a motorcycle?
Commonly, the decelerator cable is adjusted first. Decelerator cable tension is usually set so that there is no play when the throttle grip is completely closed. Once the decelerator cable has been set, the accelerator cable is adjusted. The accelerator cable tension is usually set so that 2-3mm of free play is present in the throttle grip.