Where are the spark plugs on a Chevy Camaro 350?
The 350 small block engine first appeared as a high-performance V-8 option for the 1967 Chevy Camaro. In 1968, it could be ordered with the Chevy Nova. In 1969, any Chevy vehicle could be ordered with a 350 engine. Spark plugs for the 350 engine are on the sides of the engine, outside the cylinder heads.
What should the spark plug gap be on a Chevy 350?
Spark Plug Gap. Spark plugs for the Chevy 350 engine are readily available from any auto parts store. Spark plugs come pre-gapped, but you should always verify the gap with a spark plug gap tool. The gap for a 350 small block should be 0.035 inches.
Do you need to replace spark plug wires?
Damage: It’s possible for spark plug wires to be damaged. If the insulation is compromised, or there’s an internal break, you’ll need to replace your wires even if it’s not yet time.
How many spark plugs do I need for a 350?
Eight spark plugs are required to keep the engine running smoothly. Spark plugs for the Chevy 350 engine are readily available from any auto parts store. Spark plugs come pre-gapped, but you should always verify the gap with a spark plug gap tool. The gap for a 350 small block should be 0.035 inches.
How do you change a spark plug in a car?
Apply a small amount of plug wire grease to the plug wire boot (or COP boot) and re-install each plug wire or ignition coil. Be sure and connect the plug wires to the appropriate spark plug for each engine cylinder (refer to a firing order diagram if necessary). Re-install the coil hold down bolt (s).
Where can I get a torque wrench for a spark plug?
Check your owner’s manual or the spark plug box. You will need a torque wrench, available at your local AutoZone. Apply a small amount of plug wire grease to the plug wire boot (or COP boot) and re-install each plug wire or ignition coil.
What kind of spark plug wire do I Need?
Many newer vehicles use ignition coils instead of the distributor and spark plug wire system. Once you’ve confirmed that the vehicle does indeed have spark plug wires, know that they are designed for an exact fit, based on vehicle make, model, and year.
How do you remove wire from spark plug?
You’ll learn how to get around this in Step 6. Identify which spark plug wire you’ll remove first. Then use the spark plug boot removal tool to remove one end of the old wire from the distributor. Use the tool again to disconnect the other end from the spark plug.