Where are the screws on the door panel?
The mounting screws on the door panel are located under the armrest cover. First, disconnect the negative lead (black) from the battery terminal. Open the door and use a trim removal tool to pry out the armrest cover. Remove the two Hex screws with your T27 Torx screwdriver.
How do you remove sail panel from door?
Roll down the window on the door you’ll be working on. Insert the edge of a panel tool behind the edge of the sail panel at the front upper edge of the door and pry the panel off. Pry out two small plastic round screw covers in the the door handle. Unscrew the screws located underneath the covers with a Phillips screwdriver.
What can I do with a door panel removed?
With the door panel removed, you can change a speaker or put a window back on track, and maybe save some money along the way. Roll down the window on the door you’ll be working on. Insert the edge of a panel tool behind the edge of the sail panel at the front upper edge of the door and pry the panel off.
How do you remove trim from a door?
Open the door and use a trim removal tool to pry out the armrest cover. Remove the two Hex screws with your T27 Torx screwdriver. Use the trim removal tool to pry out and loosen the A-pillar tweeter housing. The trim can then be gently removed by hand. Figure 1. Remove the door panel covers. Figure 2. Remove the A-pillar tweeter housing.
How do you remove trim from a door panel?
Let’s Get Started. 1. Remove Small Trim Pieces. Most door panels will have small trim pieces located at the top of the panel at either the right or left side. Use a small screw driver or trim removal tool and detach (pop off) any trim pieces above the door panel. Here is an upper trim piece to the left of the panel.
How to remove the door panel on a Mercedes?
You will need a set of Torx sockets. To remove the door panel, you will need your screwdrivers, trim plastic wedge but also must have Torx Bit Socket Set if you need to take any other componenet off the door. Using a plastic wedge pull out the outside mirror plastic cover. It is held in place with clips, no screws need to be removed.
How long does it take to remove a door panel?
Removing the door panel is an easy task that you can accomplish in as little as 20 min. You will need a set of Torx sockets. To remove the door panel, you will need your screwdrivers, trim plastic wedge but also must have Torx Bit Socket Set if you need to take any other componenet off the door.
Do you need to remove the cluster from a door lock?
Lift the whole panel straight up to clear it of the catch behind the door handle. Note: If your vehicle has electronic door locks, you will need to remove the door lock cluster panel from the door panel. Before removing the door panel, remove the screws attaching the cluster to the panel.