Where are the exhaust gas temperature sensors located?
The exhaust gas temperature sensors (EGTS), which are located in front of the Diesel Oxidation Catalyst (DOC) and/or in front of the Diesel Particulate Filter (DPF), are used to detect exhaust gas temperature.
What is the fault code on an exhaust gas sensor?
Using VCDS I have found that I have a malfunction on my exhaust gas temp. sensor. Fault code is P242a. Bank 1 Sensor 3. How can I identify the actual sensor?
What is the gas temp sensor on a Roomster?
Car:Roomster 1.6 TDI CR 105bhp. Hope someone can help me please. Using VCDS I have found that I have a malfunction on my exhaust gas temp. sensor. Fault code is P242a. Bank 1 Sensor 3. How can I identify the actual sensor? I’ve had a series of Glow plug light flashing problems recently, Now it has taken to limp mode a couple of times.
Where is the EGT sensor located in a diesel engine?
This sensor is located downstream of the catalytic converter, although in some cases, it could be located close to, but downstream of, the turbocharger, or close to, but upstream the DPF (Diesel Particulate Filter) on diesel applications. On engines with two cylinder heads, “Bank 1” refers to the bank of cylinders that contains cylinder #1.
Where is the exhaust gas temperature sensor located?
Next is to check the connectors for security, corrosion and damaged pins. The exhaust gas temperature sensor is typically a 2-wire sensor located in the exhaust down pipe. The exhaust gas temperature sensor should be removed to inspected for excessive carbon buildup. This process must also incorporate identifying any possible exhaust leaks.
How is the p0544 exhaust gas temperature sensor circuit Bank 1 unit?
The main mistake made during a diagnosis of the P0544 code is for the technician to believe that the oxygen sensor is the exhaust gas temperature sensor or that they are integrated into one another as one unit. This is incorrect and replacing the oxygen sensor does not clear the code or solve the issue. How serious is the P0544 code?
How to check exhaust gas temperature EGT sensor?
Use a hair dryer or heat gun and heat the sensor while you watch the ohmmeter. The resistance should drop as the sensor is heated and rise as it cools. If not, replace it. If all was good to this point, turn the key on and measure the voltage at the engine side of the pigtail. There should be 5 volts at the connector. If not replace the computer.
What does out of range bank 1 sensor 4 mean?
Exhaust Gas Temperature Out of Range Bank 1 Sensor 4 What does that mean? This is a generic diagnostic trouble code (DTC) and applies to many OBD-II vehicles (1996-newer). That may include but is not limited to vehicles from Ford, VW Volkswagen, Audi, Porsche, Chevy, Nissan, etc.