When to replace the evaporator core on a Hyundai Santa Fe?

When to replace the evaporator core on a Hyundai Santa Fe?

In this video we replace the evaporator core which requires removal of the steering column, center console, and dashboard. This is the same procedure on 2001 thru 2006 Hyundai Santa Fe Models. On most models you would also consider replacing the heater core and or all the air door actuator motors.

How to replace an automotive heater core and a / C evaporator?

Step 3 – Some vehicles utilize a common plenum for both heater core and A/C evaporator core, these types will require the refrigerant be evacuated from the system, once evacuated, disconnect heater hoses and necessary A/C equipment.

What should I do if my AC evaporator is leaking?

If a leak is detected, replacement of the entire AC evaporator is the correct course of action. Some shade-tree mechanics attempt using a sealant to fix a leak, but this is always a temporary solution, and typically creates additional problems with the AC system — so we don’t recommend this type of quick-fix.

Why does my evaporator need to be replaced?

The main reason that an evaporator coil would fail and need to be replaced is due to erosion. Over time, the refrigerant flowing through the evaporator’s coils wears down the inner lining, making the coils weaker. Certain evaporator coil cleaners can also corrode and weaken the outer lining of the coils.

In this video we replace the evaporator core which requires removal of the steering column, center console, and dashboard. This is the same procedure on 2001 thru 2006 Hyundai Santa Fe Models. On most models you would also consider replacing the heater core and or all the air door actuator motors.

Do you have to replace the dashboard on a Santa Fe?

This is the same procedure on 2001 thru 2006 Hyundai Santa Fe Models. On most models you would also consider replacing the heater core and or all the air door actuator motors. You only have the dashboard completely removed once if ever so replace all the parts that commonly fail.

Where is the AC evaporator located in a car?

On most domestic and foreign vehicles, the AC evaporator is inside the cabin, directly in between the firewall and the lower portion of the dashboard.

How long does it take to get foam out of evaporator?

Wait for a minimum of 5 minutes before removing the tube. Step 5: Remove the nozzle and let the contents drain. Once you’ve let the foam cleaning agent soak in for a minimum of 5 minutes, remove the nozzle fitting from the evaporator drain tube. After this is done, the liquid will begin to flow from the evaporator quickly.

What to do if your Hyundai Santa Fe a / C is not working?

This way, you will know which services and Hyundai air conditioning parts to get to restore your A/C into the original working condition. Let’s proceed by taking a look at some of the most common Hyundai Santa Fe A/C problems: The A/C compressor is one of the most important components of any vehicle’s air conditioning system.

On most domestic and foreign vehicles, the AC evaporator is inside the cabin, directly in between the firewall and the lower portion of the dashboard.

How does the climate control work on a Hyundai Santa Fe?

To regulate the temperature inside a Hyundai Santa Fe, the climate control system utilizes an ambient air temperature sensor (located outside the passenger compartment) and one or more in-vehicle sensors to measure the actual body temperature of your passengers and you.

How to add refrigerant to a Hyundai Santa Fe Sport?

How to Add Refrigerant to a 2013-2018 Hyundai Santa Fe Sport – 2013 Hyundai Santa Fe Sport 2.4L 4 Cyl. How to add freon to recharge the ac system in a $YearMakeModel in this how-to video About Us Maintenance Parts & Tools Contact English SpanishFrench Search Home Hyundai Santa Fe Sport 2013 Air Conditioner / Recharge Freon

Why is my Hyundai Santa Fe Sport blowing hot air?

When the air conditioner in your 2013 Hyundai Santa Fe Sport starts blowing hot air, you likely have a freon leak. Recharging the freon in your AC system is an inexpensive and easy first step to restoring the cooling capacity of your A/C system.