When to replace the ball joint on a GMC Sierra?
Apply upward force to the upper control arm and check the dial indicator. Record the measurement7. If the dial indicator reading is more than 0.50 mm (0.020 in), replace the ball joint or the upper control arm as applicable for this vehicle. Lower Test Procedure:Note:* The vehicle must rest on a level surface.
How much torque does a Duramax wheel hub have?
Chassis Torque Specs Wheel Hub Assembly to Knuckle Bolts 133 lb ft Lower Ball Joint Nut 74 lb ft Upper Ball Joint Nut 37 lb ft Tie Rod End 46 lb ft Brake Caliper Bolts 80 lb ft Brake Caliper Bracket Bolts (to knuckle) 221 lb ft Lug Nuts 140 lb ft ABS Sensor Mounting Bolt 13 lb ft 18 N m Axle Nut 177 lb ft 240 N m Brake Hose Clip 106 lb in 12 N m
What is vertical Lash limit for GM ball joint?
Vertical lash limit is 0.020″ for the lower ball joint as well as the upper balljoint. Should be tested with a dial indicator. Upper Test procedure: Note: * The vehicle must rest on a level surface. * The vehicle must be stable. Do not rock the vehicle on the floor stands.
What’s the proper torque set point for a Silverado?
So I changed the following parts and according to Chilton’s manual they recommend the following torque values: Upper Control Arms – 140 lb.ft x2 (Front and Rear bolt) and 37 lb.ft (Knuckle Stud) Lower Control Arms – 129 lb.ft x2 (Front and Rear bolt) and 37 lb.ft (Knuckle Stud) Stabilizer Links – 17 lb.ft
Chassis Torque Specs Wheel Hub Assembly to Knuckle Bolts 133 lb ft Lower Ball Joint Nut 74 lb ft Upper Ball Joint Nut 37 lb ft Tie Rod End 46 lb ft Brake Caliper Bolts 80 lb ft Brake Caliper Bracket Bolts (to knuckle) 221 lb ft Lug Nuts 140 lb ft ABS Sensor Mounting Bolt 13 lb ft 18 N m Axle Nut 177 lb ft 240 N m Brake Hose Clip 106 lb in 12 N m
So I changed the following parts and according to Chilton’s manual they recommend the following torque values: Upper Control Arms – 140 lb.ft x2 (Front and Rear bolt) and 37 lb.ft (Knuckle Stud) Lower Control Arms – 129 lb.ft x2 (Front and Rear bolt) and 37 lb.ft (Knuckle Stud) Stabilizer Links – 17 lb.ft
What are torque specs for GMC 1500 4WD?
Anyone have a link or any numbers for ALL Torque specs for 03-06 Chevy 1500 4wd. I’m looking for everything suspension wise basically. LCA’s, UCA’s, etc etc.
What are the torque specs for front suspension?
Upper control arm to frame nuts/bolts (torque spec made on the nut not the bolt head): Lower control arm to frame nuts/bolts (torque spec made on the nut not the bolt head) You need new bolts for the arm to frame on the lower control arms they are a one time use bolt. : Shock Absorber Upper Nut (torque spec made on the nut not the bolt head):