When to clear history DTC on GMC Yukon?
The SDM requests the instrument panel cluster (IPC) to illuminate the AIR BAG indicator. The SIR System is disabled and no deployments are allowed. The condition for setting the DTC no longer exists. A history DTC will clear once 100 malfunction-free ignition cycles have occurred.
What happens when a GMC Yukon has a fault?
When a fault is detected, the SDM may reset the front end sensor up to 2 times by removing and reapplying power to it. If the fault is still present, the SDM will set a DTC. Ignition voltage is between 9-16 volts. The front end sensor has been shorted to voltage, open, or shorted to ground.
What is the ignition voltage on a GMC Yukon?
Ignition voltage is between 9-16 volts. The front end sensor has been shorted to voltage, open, or shorted to ground. The front end sensor current has been above 23 mA for longer than 5 milliseconds. The SDM has not received a message from the front end sensor for more than 375 milliseconds.
What is the diagnostic code for a GMC Yukon?
Vehicle » A L L Diagnostic Trouble Codes ( DTC ) » Testing and Inspection » B Code Charts » B0083
The SDM requests the instrument panel cluster (IPC) to illuminate the AIR BAG indicator. The SIR System is disabled and no deployments are allowed. The condition for setting the DTC no longer exists. A history DTC will clear once 100 malfunction-free ignition cycles have occurred.
How to check your GMC Yukon for defects?
Perform the Diagnostic System Check – Vehicle (with HP2) ( See: Testing and Inspection\\Initial Inspection and Diagnostic Overview )Diagnostic System Check – Vehicle (without HP2) ( See: Testing and Inspection\\Initial Inspection and Diagnostic Overview) prior to using this diagnostic procedure.
What is the 2009 GMC Yukon code b0083?
I am working on a 2009 GMC Yukon code B0083 so I read the… ok. unfortunately the scan tool/code reader you are using is giving generic names for the code.