When to change the AC and alternator belts?
replacing AC and alternator belt because they have to remove that for the timing belt anyway. The parts costs on the other belts is minimal but the labor to get to them is substantial (mostly the same labor as replacing the timing belt). So it makes a lot of sense to change all the belts at the same time and only pay for the labor once.
How to change the timing belt on a water pump?
Drill a hole in your existing lower timing belt cover so the water pump weep hole tube can stick out, then fill the old hole w/silicon glue. If you buy a new cover you will need a grommet. 19200-PR7-A03 Water pump 11810-PR7-A02 ’97 lower timing belt cover 11816-PR7-000 Grommet
How often do you change the air cleaner in an Acura?
Inspect idle speed every 160,000 miles (256,000 km). Adjust the valves during services A, B, 1, 2, or 3 if they are noisy. * 2: If you drive in dusty conditions, replace the air cleaner element every 15,000 miles (24,000 km).
How often do you change the brake fluid on an Acura?
Adjust the valves during services A, B, 1, 2, or 3 if they are noisy. Independent of the Maintenance Minder information, replace the brake fluid every 3 years. Inspect idle speed every 160,000 miles (256,000 km). Adjust the valves during services A, B, 1, 2, or 3 if they are noisy.
Where do you replace the AC belt on a car?
Replacing the belt at the first sign of wear ensures it won’t break, leaving you without AC. Step 1: Locate the AC belt. The AC belt is routed over the AC compressor, which is located at the front of the engine compartment. You may need to raise the vehicle with a jack and support it with jack stands for access.
How can I tighten my air conditioner belt?
In order to achieve this, you may need to use a pry bar to put tension on the compressor and hold it in place while you tighten down the pivot bolts. Note: If your compressor uses an idler wheel tensioner, tighten the belt until it’s snug using the adjuster, then tighten down the locknut. Step 5: Check the belt tension.
How is an AC compressor driven off a belt?
Unless you drive a newfangled hybrid or electric car, the AC compressor in your vehicle is driven off a belt. The belt is strapped to the engine crankshaft balancer, which turns with the engine.
Can a serpentine belt be replaced on an old car?
Older vehicles use v-belts, which typically only drive the AC compressor. Modern vehicles use serpentine belts to drive all of the engine accessories including the drive belt. Over time, belts crack and deteriorate. Replacing the belt at the first sign of wear ensures it won’t break, leaving you without AC. Step 1: Locate the AC belt.