What year did the 22R come out?
Toyota Motor Corporation produced the 2.4-liter 22R four-cylinder engine from 1981 to 1995, and introduced its fuel-injected 22RE version in 1982.
How do you time a Toyota 22R engine?
With the timing light pointed at your lower pulley, turn your distributor until the pointer is at the 0 degree mark. While it’s running, re-connect the inner vacuum advance line, it should jump to about 5 to 7 degrees at the timing marks. Connect the second vacuum line next. There shouldn’t be any change.”
What is a 1983 Toyota pickup worth?
1983 Toyota Pickup Retail Prices
| Trim | MSRP | Invoice |
|---|---|---|
| 2 Dr Deluxe 4WD Standard Cab SB | $8,738 | N/A |
| 2 Dr Deluxe 4WD Standard Cab LB | $8,888 | N/A |
| 2 Dr SR5 4WD Standard Cab SB | $9,438 | N/A |
| 2 Dr 3/4 Ton Standard Cab LB | $7,008 | N/A |
Are 22R reliable?
The 22R and its fuel-injected upgrade, the 22RE, are legendary for their long life and reliability. They will easily last 300,000 miles without a rebuild if you keep changing the oil as needed and replace the timing chain every 150,000 miles or so. Keep in mind that the 22R only produces about 100 horsepower.
When did the Toyota 22R engine come out?
In 1985, the 22R engine was redesigned, many parts from the newer 22R (such as cylinder head, block, pistons, the timing chain, and cover, water and oil pumps) are not compatible with those from the older pre-1985 engine.
What kind of carburetor does Toyota 22R have?
Cylinder bore and piston stroke are 92.0 mm (3.62 in) and 89.0 mm (3.5 in), respectively. The Toyota 22R engine has a carburetor fuel system and ignition system with a mechanical distributor. In 1983, Toyota swapped the dual-row timing chain used in older 22R engines for a single-row chain with plastic guides.
What kind of compression ratio does Toyota 22R have?
The Toyota 22R has a cast-iron cylinder block with five bearing support system. It has a 92.0 mm (3.62 in) cylinder bore and 89.0 mm (3.5 in) piston stroke. Compression ratio rating is 9.0:1. After securing bearing cap bolts, make sure crankshaft turns smoothly by hand.
How big is the intake valve on a Toyota 22R?
Intake valve head diameter is 45.0 mm (1.77 in), and exhaust valve head diameter is 37.0 mm (1.46 in). Intake valve duration is 272°, valve lift is 10.1 mm, and exhaust valve duration is 248°, valve lift is 9.7 mm.