What to look for when replacing a clutch on a Peugeot Expert?
With the clutch removed, check the dual mass flywheel (DMF) for signs of heat stress and evidence of grease loss. The DMF should also be tested for free play and rock between the primary and secondary masses; LuK tool number 400 0080 10 is specifically designed for this purpose on all LuK manufactured DMFs.
Is there a problem with the clutch pedal on a Citroen?
Simon Hughes talks about a common failure of the clutch pedal amongst early 2000 model Peugeots and Citroens, and has some advice on how to easily fix the problem without having to payout expensive callout and replacement charges. Loading…
Why is my Peugeot EGC not working properly?
The Peugeot had an issue that allowed you to drive, but when going from park to drive or from drive to reverse it would fail to select a gear and stop driving. We traced the fault to the hydraulic pressure reservoir, this provides the quick response pressure required when making the change from reverse to forward and visa versa.
Where is the release bearing on a Peugeot?
Refitting the gearbox is the reverse of removal, however, the release bearing must be attached to the release fork – do not locate the bearing into the clutch cover. Once the gearbox is back in place, the release bearing can be snapped into the cover using an appropriate tool through the clutch cylinder aperture.
How do you change the clutch on a Peugeot?
Carefully pull the near-side drive shaft from the gearbox. Release the offside drive shaft bearing support and then remove carefully from the gearbox. You do not need to remove the sub-frame for this repair as the gearbox can be moved towards the near side wheel arch, allowing enough room to change the clutch and DMF.
Why is clutch biting point very high on Peugeot 206sw Fixya?
Firstly by good old metal to metal rubbing and secondly the concentric spring fingers don’t return as far as a new one causing the release bearing or csc to adjust . When the pressure plate concentric spring gingers wear they don’t sit proud and require more pedal effort to depress. .
Why does my Peugeot Expert go into gear?
I have just bought my Expert and have noticed that the gearbox is quite stiff and feels like stirring thick honey when changing from gear to gear. The clutch works perfectly so have ruled out a clutch issue. It goes into gear, and stays in gear when driving it’s just the heaviness of it when changing that doesn’t seem normal.
Simon Hughes talks about a common failure of the clutch pedal amongst early 2000 model Peugeots and Citroens, and has some advice on how to easily fix the problem without having to payout expensive callout and replacement charges. Loading…