What to do if your Subaru Outback horn is not working?
Fast check is to pull another relay of the same colour and number, and insert that in the horn relay’s position on the fuse box. Then find each horn down in the grill work and see if their connections are corroded. Check the connector with a multimeter and the other probe to ground and have someone press the horn .
Why is the SRS light on on my Subaru Outback?
The connectors are always yellow for SRS (airbag) system components. They are very annoying to separate (that’s an understatement), you may have no clue how to remove it. Probably no need to anyway, just a visual should do. The underseat connector is easily accessible and the seats arent’ hard to remove at all.
Where is the airbag light on a Subaru Outback?
There’s a 6 pole pin connector up under the cover below the steering wheel – sort of “above the gas pedal” next to the center console side of the drivers foot well area. there’s a few dangling plugs there, two green plugs, a black plug or two…woah there’s a hummingbird 8 feet from me, cool – and a bunch of connectors.
Why is my airbag light not working on my Subaru?
Connection of (AB6) to airbag control module is improper. The first thing to do is to check for trouble codes. I believe that the Subaru Select Monitor or a similar code reader capable of communicating with the airbag control module is needed, therefore necessitating a visit to the dealer. The airbag DTCs are 2-digit codes.
What should the relay resistance be on a Subaru horn?
The horn relay resistance between the terminals should be measured while connecting terminal number 4 to the battery’s positive terminal and terminal number 3 to battery’s negative terminal. With 12 volts direct current available between the horn terminal and case ground, check if the horn works properly.
Where is the fuse on a Subaru horn?
The problem is one of the following two: fuse #12 behind the dashboard towards the driver’s side is blown or the brake light switch mounted up high on the brake pedal under the dash is faulty. If the fuse is the problem, it can prevent the gear shifter from moving as well as loss of brake lights.