What to do if you have a gearbox malfunction light?
Contact an authorised repairer to check the condition of your brake pads. Drive carefully to an authorised repairer immediately as there is a fault in the airbag or seatbelt system. The system may fail to trigger in an accident if you do not get the fault rectified. This is your gearbox malfunction light.
What should I do if I see a warning light on my Mercedes?
Switch off the engine immediately. Wait until the engine has cooled down, make sure the air supply to the radiator has not been inpaired. Avoid high loads on the engine and drive to the nearest authorised repairer ensuring the coolant temperature remains below the red marking. Caution – the cooling system is a pressurised system.
When to stop a car with a red warning light?
Stop the car as soon as it is safe to do so. The red warning light appears when there is no AdBlue range left; once this happens the car will not restart once the ignition is turned off. The system will need a full top-up before the car can be restarted.* Check that the bonnet is closed properly. If the light disappears this is a normal function.
Is it safe to drive with a warning light on?
Safe to drive: Yes, if it’s always lit and there’s no loss of power. You should get it checked as soon as possible. No, if it’s flashing while you’re driving. Avoid heavy acceleration and high engine speed and stop the vehicle. Restart the engine after 2 minutes to reset the engine management system.
What are the warning lights on my GMC?
What follows is easily the most complete list available of symbols and warnings that may appear in and on your car’s dashboard or instrument cluster. The following are warning lights and indicators found in vehicles built by GMC.
Safe to drive: Yes, if it’s always lit and there’s no loss of power. You should get it checked as soon as possible. No, if it’s flashing while you’re driving. Avoid heavy acceleration and high engine speed and stop the vehicle. Restart the engine after 2 minutes to reset the engine management system.
What to do if your car dashboard warning light is still flashing?
Avoid heavy acceleration and high engine speed and stop the vehicle. Restart the engine after 2 minutes to reset the engine management system. If the light is still flashing, turn off the engine and contact us to report your breakdown.
Is it safe to drive with engine management light on?
Engine management light Safe to drive? Yes – if it’s always lit and there’s no loss of power. You should get it checked as soon as possible. No – if it’s flashing while you’re driving. Avoid heavy acceleration and high engine speed. Stop the vehicle when it’s safe to do so.