What size handlebars do Harleys have?
As far as industry standards, Handlebars typically come in either 1″ or 7/8″ diameter. Almost all Harley applications will use 1″, however, for those riders looking for fatter bars 1 1/4″ and 1 1/2″ are available and may require special clamps/hand controls depending on the bars.
What are big motorcycle handlebars called?
May rise above triple clamp up to 24 in (610 mm) or more, called ape hangers when very high, or may drop a few inches below, called clubman bars.
How big are the handlebars on a Harley Davidson?
Bar diameter/thickness: The stock handlebars on Harley-Davidsons are 1” thick across the entire bar (this the outside diameter), some companies refer to this as “thick”. You may come across bars refered to as “ [mageProductLink sku=”321-0281″ title=”\chubby [/mageProductLink]” or “fat” that means the OD/thickness is larger than stock.
What should I measure when buying new handlebars?
When buying new bars, a rough formula to follow is to measure the increased height + 1/2 the increased pullback that the new bars will give you. This amount will be very close to how much additional cable and brake line that you may need.
What’s the best way to change handlebars on a motorcycle?
Obviously the best method is to fit the new bars to the motorcycle and then make the increased length determinations, if needed at all. When planning for new bars, make sure to allow room for your new bars to clear your gas tank on full lock turn. Honda Model
How much cable do I need for new handlebars?
This amount will be very close to how much additional cable and brake line that you may need. However, the best method is to fit the new bars to the motorcycle and then make the increased length determinations, if needed at all.
How are handlebars measured on a Harley Davidson motorcycle?
Motorcycle Stock Handlebar Measurements – Harley Davidson, Triumph, Victory, Honda, Kawasaki, Suzuki, Yamaha, Buell, Ducati and Indian See how we Measure Handlebars at the bottom of this page and also info on the Harley Davidson use of an electric throttle assembly. New cables and new brake lines?
Why are the bars on my Harley Davidson so tall?
Any time you’re going to be switching to taller bars, it’s a good idea to upgrade the stock rubber bushings that the risers mount to as well. Taller bars add more leverage to your steering, and any amount of flex you might experience with the stock ones will be multiplied once you go taller.
What kind of Riser do I need for my handlebar?
STOCK HANDLEBAR WITH RISERS If the stock handlebar has the correct width and hand position for you, but seems just a little too far away, we offer riser kits that bring the controls within reach. Straight and curved risers are available for many model and handlebar combinations.
What kind of tubing are motorcycle handlebars made of?
All of the Handlebars featured on the following pages are made of high quality seamless cold drawn steel tubing. They’re polished, bent by the mandrel method thereby eliminating unsightly flat outer sections and then chrome plated or black powder coated to perfection. All measurements are made in normal riding position.