What should the torque be on a Jaguar wheel?
If you are planning on installing a wheel on your Jaguar, it is important to be aware of the manufacturer’s recommended torque settings. Using the proper torque helps ensure that the wheel assembly is securely installed.
Where are the torque settings on a MG?
Bolt/fixing Nm ft.lb Engine Engine Engine Camshaft cover bolts 9 7 Camshaft gear bolt 8mm bolt 10mm bolt 33 65 24 48 Crankshaft pulley bolt 205 151
How do you adjust the brakes on a Jaguar XJS?
Rotate the brake disc until the inspection hole on the face of the brake disc is at 12 o’clock. Shine a light inside to look for an adjuster, then use a long thin flatblade screwdriver to turn it and back-off the brake shoes.
Why does my Jaguar XJ-S differential whine?
For many years the differential in my 1978 Jaguar XJ-S has exhibited a slight whine after the differential oil has warmed up. The symptoms are classic for a differential pinion that, over time, has lost the factory pre-load settings. The symptoms are: 1) The whine usually starts after the differential oil has warmed up.
How to find tyre pressure on a Jaguar XJ?
This cars tyre air pressure guide chart can in some cases contain actual tyre pressure placards from a Jaguar Xj which can list the space saver tyre pressure and the laden / fully loaded tyre pressure. To find the right pressure you will require the vehicles current tyre size and the vehicle’s year of manufacture.
Where is the transmission on a Jaguar XJ6?
Transmissions are a four-speed automatic equipped with a lock-up torque converter. The transmission is mounted to the back of the engine, and power is transmitted to the fully independent rear axle through a two-piece propshaft.
Which is standard equipment on a Jaguar XJ6?
Power-assisted Anti-lock Brake Systems (ABS) with four-wheel disc brakes are standard equipment on all Jaguar XJ6 models covered in this manual. Power rack-and-pinion steering is also standard equipment. Your Jaguar manual The aim of this manual is to help you get the best value from your vehicle. It can do so in several ways.
How to set torque wrench to 80 nm?
Set torque wrench to 80 Nm and apply to the lower ball joint retaining nut (Illustration 1). Note: Hold the ball joint stud with a suitable wrench to prevent possible rotation while performing the 80 Nm check (Illustration 2). ILLUSTRATION 1 ILLUSTRATION 2 2.