What should the idle speed be on a Mazda 626?
Bring the engine to an idle speed of 500 to 800 rpm if you have an automatic transmission, or 550 to 800 if you have an automatic transmission. Exit your Mazda 626 with the emergency brake firmly engaged and open the hood to gain access to your engine.
Where is the timing light on a Mazda 626?
Shine the actual timing light on the yellow mark located on the crankshaft pulley. Observe the timing mark on the pulley and compare the timing to the degree tab located on the front of the engine. You can discontinue all operations if you are satisfied with the current ignition time, or you can proceed to the next step.
Why does 1st gear not shift in Mazda B series?
Sporadically between 1st and 2nd gear, there is a thunking which comes from underneath the truck. At times 1st gear just keeps revving and doesn’t seem to want to shift and when it does there is quite a jolt when it does due to the thunking.
Are there transmission problems in a Mazda B3000?
I have a 04 B3000 which has recently started having problems that I believe are either in the transmission (automatic) or U-joints. Sporadically between 1st and 2nd gear, there is a thunking which comes from underneath the truck.
Are there any transmission problems with the Mazda 626?
Mazda vehicles were notorious for automatic transmission problems in the early 2000s, especially the 626, Millenia, and MPV models. From 2005 to 2020, Mazda automatic transmissions in Mazda 3, 5, 6, CX-7, CX-9 have been very reliable with very few transmission issues. That doesn’t mean that Mazda transmissions never fail.
When was the last time a Mazda transmission failed?
From 2005 to 2020, Mazda automatic transmissions in Mazda 3, 5, 6, CX-7, CX-9 have been very reliable with very few transmission issues. That doesn’t mean that Mazda transmissions never fail.
What kind of transmission does a Mazda use?
Mazda that uses a 4-speed 4R44E automatic transmission in a longitudinal arrangement suffers from a fairly common issue with overdrive gear engagement. The problem manifests itself as a failed engagement of overdrive gear, resulting in a shift to neutral.
Are there any transmission problems with a Mazda 5R55N?
Mazda vehicles that use a 5R55N 5-speed automatic transmission have a fairly common problem with failures to engage 4th and 5th gear. In some cases, this will be followed by erratic and delayed changes in other gears. This issue can be intermittent or constant, and initially, the problem will only occur when the car is cold.