What should my tire pressure be on my Harley?
Springtime: Check Your Tire Pressure! Most Harley-Davidson® motorcycles are equipped with Dunlop® tires; the tire pressures (cold) should be 36psi front and 40psi rear. Also, check your tires for uneven tread wear and any deterioration in the sidewalls and in the tread itself.
What is the difference between a Wide Glide and a Softail?
The Wide Glide has a 4-inch-wider wheel base. There is a significant weight difference between the two bikes. The standard Softail weighs 695 pounds dry, while the Wide Glide only weighs 647. The distinctive stretched rear fender on the Softail contributes to its iconic look and is absent on the Wide Glide.
Is a Dyna Wide Glide good for tall riders?
Taller bikers say the Dyna Wide Glide is the way to go if you can find one. An unladen seat height of 28.5 inches doesn’t sound that high, but the forward foot controls give you plenty of room to stretch out.
What PSI should motorcycle tires be?
Typically, street motorcycle tires are in the 28 to 40 psi range. A label like this may be on the bike that tells you what tire pressures to use for different load conditions.
What is the tire pressure on a 2005 Harley Davidson Road King?
38 front, 40 rear rear.
What kind of tires does a Harley Davidson Dyna Wide Glide have?
Regarding the chassis characteristics, responsible for road holding, handling behaviour and ride confort, the Harley-Davidson FXDWG Dyna Wide Glide have a frame with front suspension being and in the rear suspension it is equiped with . Stock tire sizes are 90/90-21 on the front, and 130/90-16 on the rear.
What should tire pressure be on a Dyna Glide?
Also, be sure to keep your tire pressure at 36 PSI. If you have spoked wire wheels, be sure to check periodically for spokes that have become loose, or wheels that have gone out of true. Most Harley shops can still tighten and true wire wheels. Why do Dyna Glide bikes come with different sized front and rear tires?
What are the tire sizes for a Harley Davidson?
Stock tire sizes are 90/90-21 on the front, and 130/90-16 on the rear. As for stopping power, the Harley-Davidson FXDWG Dyna Wide Glide braking system includes Single disc size 296 mm (11.7 inches) at the front and Single disc size 296 mm (11.7 inches) at the rear.
What should the front tire pressure be on a Harley Davidson?
The H-D owner’s manual calls for 36 psi in the front tire. Will going to 40 psi cause any problems with the front end, i.e. excess wear or speed wobble and will there be any problem with wear or damage to the front tire. Thanks in advance, Tom
How big are the tires on a Harley Davidson Softail?
We have 2405 /250 Swingarm Conversions for Harley Softail Twin cam motorcycles, Softails, Breakouts, Dynas, Rockers & Sportsters. These 280 & 330 tire motorcycle swingarm kits can be installed only in conjunction with a 20mm secondary belt and can fit up to 12” wide rims.
What should the belt tension be on a Harley Davidson?
Harley-Davidson has a BELT TENSION GAUGE (Part No. HD-35381) to help. 2. Measure belt deflection “B” several times, each time with belt moved (by rotating rear wheel) to a different position on sprockets. With sprockets rotated to tightest belt posi-tion, belt deflection “B” (measured at position “A”) should be 5/16-3/8 in. 1.
What should the wheel alignment be on a Harley Davidson?
Harley Davidson Wheel Alignment Made Simple In an ideal world the front and rear wheel should be: 1. Inline 2. Not offset from each other 3. In the same plane, i.e. if the front wheel is vertical, the back wheel is also perfectly vertical. In practice: 1. We can adjust 2.
Where is the tension gauge on a Harley Davidson?
At the lower strand, position “A”, mid-way between transmission sprocket and rear wheel sprocket, apply 10 Ibs. of upward force on lower span of rear belt. Harley-Davidson has a BELT TENSION GAUGE (Part No. HD-35381) to help. 2.