What should I do if my canon base alarm light is not working?
Open the cover, push the ink cartridge completely up, then confirm that the cartridge is properly installed. Close the cover. If the problem isn’t resolved, remove, then reinstall the cartridges. The ink cartridge isn’t installed.
Is there a way to turn off the car alarm?
Turn the ignition key to the on position. It is not necessary to start the car. As a matter of fact, you may find that you cannot start the car if you try. Toggle the switch or push the button. This will activate the valet bypass. The alarm should now be disabled.
How to resolve an alarm lamp flash error?
Understand and resolve alarm lamp flash error that display on a PIXMA MG2900 printer. When an error occurs, the Alarm lamp flashes. Check the status of the lamps, then take the appropriate action if the Alarm Lamp Flashes repeatedly see Table 1, or if the ON Lamp and Alarm Lamp Flash alternately see Table 2.
What to do if your anti theft light won’t turn on?
If this is some other type of light then disconnect your battery (negative first then positive) for 30 minutes and reconnect in reverse order (positive then negative). This should reset the computer. You will loose presets in your radio.
What should I do if my car alarm never sets?
Fix an alarm that starts when you turn the car on. You could need a new battery. Disable the alarm by removing the alarm fuse, and then bring the car to the shop. They can check your battery and move on from there if the problem is the alarm system. Diagnose an alarm that never sets.
What should I do if my alarm lamp is flashing?
If the lamp on the ink tank is flashing, the ink may have run out. Replacing the ink tank is recommended. If a print is in progress and you want to continue, tap Resume / Cancel with the ink tank installed. Then print will continue. Replacing the ink tank is recommended after the print completes.
Why is my alarm lamp not working properly?
Ink tank is not installed properly./Ink may have run out. If the lamp on the ink tank is not lit, the ink tank may not be installed properly. Install an appropriate ink tank. If the lamp on the ink tank is flashing, ink may have run out. Replacing the ink tank is recommended.
What happens if you remove fuse from car alarm?
Doing this will not cause damage to the car, but make sure you return the fuses after you’ve determined they are not for the alarm. Some car alarms, when tampered with, prevent a car from starting as an anti-theft function. If you remove the fuse and cannot start the vehicle, you will have to take the car to a mechanic or dealer.