What should I do if my brake warning light is still on?
If repairs have been made and the light is still on the valve must be reset by pushing hard and quickly on the brake pedal. This action should push the proportioning valve plunger to the center of the valve and turn off the warning light. Got Any Questions? If you have any questions about brake warning lights please visit our forum.
What does a red brake warning light mean?
What Goes Wrong? This red brake warning light is designed to warn you of a pending danger that affects the immediate braking ability of your car. This danger can affect the front or rear portion of the brake system. How Much Does It Cost?
What to do if your brake line is leaking?
If you have a brake line that is leaking because it has rusted through, here is how to go about bending a break line and slicing together the brake lines. You can fix the leak yourself for less than $10 ( if you have the tools) Loading…
What to do if your brake fluid is low?
Check the Brake Fluid: A minimum amount of brake fluid must be present in the system for it to work correctly. A fluid level sensor is located in the brake master cylinder fluid reservoir which monitors this level. With the hood open locate this reservoir and check the fluid level. There are only two reasons for this fluid to be low.
What should you do when your brake warning light comes on?
Vehicles with ABS brakes have two warning lights — one for ABS system malfunctions and one for mechanical problems. If one of the brake system warning lights come on, it can be a relatively minor problem or a major safety issue. Regardless of which brake light is illuminated, always check your car over before continuing to use your car.
What does the brake fluid warning light look like?
When the main brake warning light is triggered by a fault in the system, it will be illuminated in red. It appears as a circle, with a “!” in the center, and parentheses on either side. If your brake fluid level is too low, typically you will see a similar warning light, only it will be yellow or amber instead of red.
What to do if you have a brake line leak?
Place a screw or bolt in one end. Locate the steel brake line on the plate where it screws into the wheel cylinder and use a line wrench to loosen the brake line fitting. Remove the fitting. Place the vacuum hose over the line to prevent leakage.
Why are there brake lights on my dashboard?
Some common brake lights that can show up on a dashboard include: This light is a warning that brake pads are getting too worn and should be replaced soon: If these lights go off and on repeated or when you turn, it can mean to check the brake fluid level in the master cylinder: