What oil does Hyundai Elantra 2010 take?
The recommended oil for the car is SAE 5w-30 full synthetic and You should replace the engine oil and filter every 3000 – 5000 to ensure Your engine is at its peak performance.
How do you reset the oil light on a 2010 Hyundai Santa Fe?
To reset this message, press the SELECT/RESET button (left pointing arrow) on the bottom right of the steering wheel for more than 1 second. The service interval will be reset to the default setting. Turn the ignition off and then start the engine to verify the indicator has been reset.
How many quarts of oil 2010 Santa Fe?
5.5 quarts
Engine Oil SAE 5W-20 is preferred. Capacity: 5.5 quarts (with filter)After refill check oil level.
What kind of engine oil for Hyundai Santa Fe cm?
Example: for gasoline engines Hyundai Santa Fe (Cm) 2006, suitable multigrade semisynthetic oil 15W-40 quality SJ. For types Cm made in 2010, for the cold season, well suited semisynthetics 0W-40 \ SL. If possible, check the selected oil for compliance with the manufacturer’s specifications and service intervals. Checking the Engine Oil Condition
What happens if your Hyundai Santa Fe has low oil pressure?
One of the most serious issues that can happen to your Hyundai Santa Fe‘s engine is if ends up with low oil pressure. Low oil pressure will cause the engine to seize up. When the oil pressure light on, it should be assumed that the engine locking up is imminent.
Are there any problems with the Hyundai Santa Fe?
Hyundai Santa Fe owners have reported 20 problems related to engine burning oil (under the engine and engine cooling category). The most recently reported issues are listed below. Also please check out the statistics and reliability analysis of Hyundai Santa Fe based on all problems reported for the Santa Fe.
Example: for gasoline engines Hyundai Santa Fe (Cm) 2006, suitable multigrade semisynthetic oil 15W-40 quality SJ. For types Cm made in 2010, for the cold season, well suited semisynthetics 0W-40 \\ SL. If possible, check the selected oil for compliance with the manufacturer’s specifications and service intervals. Checking the Engine Oil Condition
How to reset the oil change light on 2010 Hyundai Santa Fe?
Go under the hood and add oil. Turn on the engine and check the oil pressure gauge to make sure it rises. Let your Santa Fe run for a minute. Lower your Hyundai Santa Fe and turn off the engine. Take an oil reading on the dipstick. If the oil level isn’t at full, add a bit more oil. Thanks Kinldy rate the answer Smith Posted on Jul 08, 2009
Is there an oil shortage in Hyundai Santa Fe?
Tl the contact owns a 2013 Hyundai Santa Fe. While driving up a hill, the vehicle started shaking. The contact pulled over and the vehicle shut off. The vehicle did not restart and the oil level was on empty. There was no warning indicator illuminated on the instrument panel regarding an oil shortage.
Is the 2010 Hyundai Santa Fe in good condition?
I own a 2010 Hyundai Santa Fe. 87,000 miles. Good condition. I own a 2010 Hyundai Santa Fe. 87,000 miles. Good condition. Today my gear shift was working as normal. Allowing me to go from park to reverse to neutral to drive.