What kind of pump does Stuart Turner use?
We only use the Aqua Flow Products brand which are new parts and can be used in every Stuart Turner water pump including monsoon and universal pumps. If your pump runs continuously its important you turn the power off to your pump as soon as possible.
How to open a tune on a ktuner?
Open your Ktuner or Hondata PC software Within the Ktuner or Hondata software, click on “File” in the menubar, and then select “Open” or “Open Tune” At this point, the tune will load. You may be presented with notes regarding the tune, if so, click “OK” to continue.
What should my throttlestop and gputweak settings be?
An even better idea would be to leave the turbo ratios at their default values. If your laptop cannot handle your CPU when it is set to 70 Watts then lower this value to what your cooling solution can handle. Maybe the turbo long power limit should be set to 60W or 50W to keep your laptop from overheating during a long gaming session.
What’s the max power setting for stage tunes?
** Please note that our KTuner stage tunes utilize their on the fly map switching feature and you must switch to map slot 3 to access the max power setting of your tune. (more details in the KTuner notes section below) The “Sport” button also increases power further on Si models. **
What can you do with Intel throttlestop utility?
Initially much simpler and more limited than Intel’s Extreme Tuning Utility (XTU), ThrottleStop has grown in feature-set and stability over the years, and can be used for undervolting, “set-and-forget” temperature/clockspeed profiles, benchmarking, SST tweaking, and temperature monitoring.
Can a bad fuel pump shut off switch cause performance issues?
As the switch has the capacity to shut off the fuel pump, issues with it can potentially lead to drivability and performance issues for the vehicle. Usually a bad or failing fuel pump shut off switch will produce a few symptoms that can alert the driver of a potential issue.
What do I need to know about throttlestop guide?
Outside of Undervolting, done in the “FIVR” snap-in, this section is where you will find most of the settings you will likely use to determine the behavior of your CPU. Clock Modulation/Chipset Clock Modulation – These settings were designed to counter an older method of throttling which told the CPU or chipset to run at a percentage capacity.