What kind of pulley tool does Honda use?
The Powerbuilt 648796 50-millimeter Honda crankcase pulley removal tool keeps the crank pulley still, allowing users to easily loosen or tighten the crank pulley bolt in most Honda or Acura engines.
Who are the technicians at Hond a techs?
We employ only ASE certified technicians that are experienced in Acura and Honda. Honda and Acura dealership certified. We use factory shop manuals and the Honda factory PGMFI Tester. All repairs, parts and labor are warranted. All work is approved by you in advance before we touch anything. Same day service is possible on most repairs.
Are there any hot finds from Honda-Tech marketplace?
Five Hot Finds from the Honda-Tech Marketplace. From project and complete cars to parts to complete them, the Honda-Tech Marketplace is the first stop in your Honda hunt. Honda K20A, K20C1 and K24 Compared and Contrasted. Some members of the Honda community might think that the two K-Series engines are similar, but they are not.
Who are the Honda experts at Hare Honda?
Our Honda experts are professionally trained and specialize in auto parts for Honda models. They will be happy to help you determine exactly what part your Honda needs, and can assure you that it will be a perfect fit for your car, van or SUV.
The Powerbuilt 648796 50-millimeter Honda crankcase pulley removal tool keeps the crank pulley still, allowing users to easily loosen or tighten the crank pulley bolt in most Honda or Acura engines.
Can you remove the pulley on a Honda Civic?
With the bolt removed, you should be able to just pull off the crankshaft pulley. If your Civic has the drive belt still attached, you’ll need to remove it before pulling off the crankshaft pulley. You’ll need to loosen the alternator retaining bolt in order to relieve tension on the belt.
How do you replace the timing belt on a Honda Accord?
Install the timing belt drive pulley. Install the tensioner. Install the water pump pulley. Install the camshaft pulley. Loosen and tighten the adjusting nut to tighten the tensioner belt. Install the timing balancer belt pulley and lower cover. Then, tighten the bolts. Install the crank pulley and bolt.
What kind of socket does a Honda Accord use?
Using a Honda-specific 19 mm harmonic balancer socket, torque off the crankshaft pulley / harmonic balancer bolt with a powered (air or electric) impact driver. Approximately 30 seconds of electric powered impact eventually will loosen the bolt. A standard 19-mm impact socket will not work.
How do you replace the pulley on a Honda Civic?
Attach a long breaker bar to the “handle” end of the tool. It should be angled downward against the ground as a brace. Next, attach a 17mm socket to a long extension, and attach it to the crank pulley bolt through the center of the tool. Then, using another large breaker bar, crank on the pulley bolt counterclockwise.
How do you jack up a Honda Civic?
Use a two-post lift if that’s an option. If it’s not and you’re doing this in the driveway, just set the car up on jack stands. Remove the passenger’s side wheel. The crankshaft pulley is the single, large pulley at the bottom of the engine. Figure 1. Diagram of the jacking points. (Related Article: How to Jack Up Your Civic – Honda-Tech.com)
How do you unbolt a crank pulley with an impact gun?
If you’re lucky, you’ll be able to remove the bolt on this pulley by using just an impact gun. Attach a 17mm socket and attempt to unbolt the crank pulley bolt. In order for this to work, you’ll need an impact gun with more than 600 lb/ft of breakaway torque. If you have one handy, try it out.