What kind of oil to use in a Shovelhead engine?
The best oil to use in Shovelhead engines and transmissions is SAE60. If you don’t have access to SAE60, you can use 20W-50 for the engine and MVT V-Twin synthetic transmission fluid for the transmission. The best oil to use in Evolution 1340 – Twin Cam engines and transmissions is 20W-50.
Do you have to lubricate a new Shovelhead bolt?
The bolt must be properly torqued to the right specifications. When re-torquing or installing new bolts on a Shovelhead, it’s a good idea to apply a light film of lubricating oil to a bolt to reduce friction. Always check manufacturer’s instructions and specs before beginning this type of job.
Can a chain drive Shovelhead cause an oil leak?
The Shovelhead was equipped with automatic oilers in the primary and for the chain drive. These two systems have historically taken the blame for oil leaks. According to Shovelhead USa, both the primary and chain oilers can be plugged without harming the motorcycle.
What kind of oil to use in Knucklehead engine?
The best oil to use in Knucklehead engines and transmissions is SAE60. If you don’t have access to SAE60, you can use 20W-50 for the engine and MVT V-Twin synthetic transmission fluid for the transmission. The best oil to use in Panhead engines and transmissions is SAE60.
The best oil to use in Shovelhead engines and transmissions is SAE60. If you don’t have access to SAE60, you can use 20W-50 for the engine and MVT V-Twin synthetic transmission fluid for the transmission. The best oil to use in Evolution 1340 – Twin Cam engines and transmissions is 20W-50.
What kind of lube do you use on a Harley?
Some use gear lube in the transmission and chaincase. Some even use ATF in chaincase and claim they have great results. Answer: For any Harley Twin-Cam engine, we highly recommend using AMSOIL Synthetic 20W-50 in “all three holes” (as they put it) for two essential reasons.
How often should you change the oil on a Shovelhead?
That keeps the engine and other moving components lubricated and operating efficiently. The official maintenance recommendation is to change engine oil every 5,000 miles, but changing the oil at 2,500 miles is a good idea for an older shovelhead.
What kind of brake fluid does a Harley Shovelhead use?
Models 1975 and later use Dot 5 brake fluid. The front fork oil capacity varied over the 18 years the shovelhead was in production. Instructions for new front forks include the amount of oil required. Models from 1966 to 1969 use 6.5 oz. of fork oil.