What kind of gas does a Mercury 4 stroke outboard take?
Specifications – 115
| HP / kW | 115 / 86 |
|---|---|
| Recommended fuel | Unleaded Regular 87 Octane Minimum (R+M/2) or 90 RON 10% Ethanol Maximum |
| Recommended oil | Mercury FourStroke Oil 10W-30 |
| Engine protection operator warning system | SmartCraft Engine Guardian |
| Compatible with SmartCraft digital technology | Yes |
What fuel should I use in my Mercury outboard?
Answer: Fuels containing up to 10 percent ethanol are considered acceptable for use in Mercury engines. Fuels containing higher levels of ethanol are not considered acceptable for use, and the use of fuels containing ethanol higher than 10 percent can void the warranty.
What kind of oil do you put in a Mercury outboard?
– Mercury or Quicksilver Premium 2-Cycle TC-W3 Outboard Oil 2-stroke oil is normally added to the fuel tank when filling with fuel. The underlying provider failed on Open.
What kind of oil does a Mercury autoblend use?
– Mercury or Quicksilver Premium Plus 2-Cycle TC-W3 Outboard Oil. Autoblend models have an oil reservoir mounted inside the boat that automatically blends oil with the fuel at a constant ratio of 50:1; 2-stroke oil is added to the reservoir and does not need to be mixed with the fuel (unless required for running-in)
What’s the correct ratio of oil to gas for an outboard motor?
Most outboard motors require a 50:1 ratio. Pour the correct amount of 2-stroke oil into a clean gas can. Add the correct amount of gasoline. Stir or shake the container to mix the oil and gas.
What is the fuel / oil mixture for my Johnson or Evinrude Motor?
What is the Fuel/Oil mixture for my (Johnson or Evinrude) motor? Please note that some Johnson and Evinrude Owners Manuals mention 100:1 mixture ratio after the motor is completely broken in, but most experts suggest against doing that. Stick with 50:1 for the 1964 and newer motors.
What kind of oil should I use for my Mercury outboard motor?
What Oil-to-Gas Mix Should I Use for My Mercury Outboard Motor? What Oil-to-Gas Mix Should I Use for My Mercury Outboard Motor?
– Mercury or Quicksilver Premium Plus 2-Cycle TC-W3 Outboard Oil. Autoblend models have an oil reservoir mounted inside the boat that automatically blends oil with the fuel at a constant ratio of 50:1; 2-stroke oil is added to the reservoir and does not need to be mixed with the fuel (unless required for running-in)
What is the Fuel/Oil mixture for my (Johnson or Evinrude) motor? Please note that some Johnson and Evinrude Owners Manuals mention 100:1 mixture ratio after the motor is completely broken in, but most experts suggest against doing that. Stick with 50:1 for the 1964 and newer motors.
When to adjust idle mixture on Mercury Outboards?
These idle mixture adjustment tuning procedures apply the Mercury outboards manufactured between 1965 thru 1989—specifically 45-HP to 115-HP models. It’s highly recommended to follow the idle mixture adjustment procedures in the factory repair manual.