What kind of cooling system does a Jeep Wrangler use?
Single and double-core aluminum radiators provide better airflow and cooling capabilities by eliminating the number of rows copper-brass radiators needed. This also meant less stress on the radiator fan, allowing it to displace heat more effectively. A larger tube diameter allows for more coolant to flow through the engine block.
Where are the coolant tanks on a Jeep Wrangler?
There are two tanks located on opposing sides of your radiator. The inlet tank feeds coolant into the engine, while the overflow tank keeps hot coolant in reserve until it’s cool enough to reenter the cooling system. They are made of hard plastic and have varying capacity depending on your Wrangler’s make and model.
Is there an aftermarket oil cooler for Jeep Wrangler?
Oil coolers can provide additional cooling capabilities to your Jeep. An aftermarket oil cooler is essentially the same as the transmission cooler and seeks to regulate the temperature of your oil. Install a temperature gauge to ensure your oil cooler is running your oil at an optimal temperature.
Can a high flow radiator work on a Jeep Wrangler?
You’ll need to adjust the spring pressure if you install a high flow pump to prevent overflow. Horizontal or cross-flow radiators fixed this by moving the radiator cap to the suction side of the pump to prevent boil over. This means a high flow pump can work without any damage to your cooling system.
How does the cooling system work on a Jeep Wrangler?
A cooling system is comprised of six main parts: Your coolant is designed to absorb heat from the engine block. Coolant is pushed through the engine block via the water pump and then through a series of fins and tubes inside the radiator that allow the heat to dissipate.
What kind of coolant should I use on my Jeep Wrangler?
You are best off, to just purchase from your Jeep Dealer. Be noticed my coolant/antifreeze level is way below the minimum line. It calls for MOPAR antifreeze. Can I use a different type? If so what type should I use (from advance auto parts) and what should I mix with?and does it matter if the color isn’t orange?
What happens when you remove the radiator cap on a Jeep Wrangler?
Removing your radiator cap can result in burns and, during vehicle operation, significant loss of coolant. The pressure cap contains a spring set to 15 psi that forces the valve of the cap to open under high pressure. Once this happens, excess coolant flows to the overflow tank and then returns once the coolant has cooled.
Can you mix HOAt and oat in a Jeep Wrangler?
No, and to be very clear, research to ensure that your Jeep has OAT or HOAT and ensure that you DO NOT MIX THEM. Between ’12 and ’13 (I believe), Jeep moved from HOAT to OAT (one’s orange, the other’s purple).
What should the thermostat be on a Jeep Wrangler?
Most radiator thermostats are designed to run at about 200 degrees. This one should be obvious, but never take out your thermostat; this would defeat the purpose of your cooling system. Keep in mind the thermostat is used to monitor the temperature of the coolant, hence why it’s placed between the engine and the radiator.