What Kia Sorento has remote start?
Kia K900
Kia Models With Remote Start Kia Sorento. Kia K900.
How to program the Kia Sorento factory remote?
Sit in the driver’s seat of the vehicle and turn the car ignition to the “ON” position. Do not start the vehicle. Press and hold the “LOCK” button on the first remote for 1 second and release. Repeat the same procedure for the second remote. If only programming one remote, then press and hold the lock button on the remote for 3 seconds and release.
Are there any problems with the 2012 Kia Sorento?
CarComplaints.com Notes: As long as catastrophic engine failure at under 60,000 miles is the top owner complaint, it’ll be pretty hard to recommend the 2012 Sorento. Click on a category below for details. Help? Loading Curious how the 2012 Sorento compares to other years?
Where is the diagnostic plug on a Kia Sorento?
Locate the diagnostic plug for the vehicle and remove the cap. The plug will be located behind the battery on the driver side of the engine compartment. The cap for the plug says “Diagnostic” on it. Strip both ends of the 22 gauge wire to expose 1/2 inch of bare copper. Place one end of the wire in the number 6 port of the diagnostic connector.
How does the Kia Sorento remote start work?
Distance may vary due to line of sight with transmission. The Kia Sorento Remote Starter is a comfortable way for anyone to simply stay inside and start their car to both defrost the windshield and to get the inside all nice and toasty for the drive.
Can a Kia Sorento LX be used as a car?
Only fits the Sorento LX w/ power windows and doors. Give yourself 3-4 hours to install it and take your time and do it right. You don’t want issues starting your car at some point, or worse having your car shut off while driving. Excellent kit, worth every penny, in fact I’d say it’s an amazing deal.
How long does it take to install Kia Sorento key start kit?
TL;DR – Absolutely great kit if you have the correct car. Only fits the Sorento LX w/ power windows and doors. Give yourself 3-4 hours to install it and take your time and do it right. You don’t want issues starting your car at some point, or worse having your car shut off while driving.
Locate the diagnostic plug for the vehicle and remove the cap. The plug will be located behind the battery on the driver side of the engine compartment. The cap for the plug says “Diagnostic” on it. Strip both ends of the 22 gauge wire to expose 1/2 inch of bare copper. Place one end of the wire in the number 6 port of the diagnostic connector.