What is the blue wire connected to?
The blue wire from the ceiling fan gets connected to the second live wire from the ceiling. This second wire can vary in color but is most commonly red or black. This connection allows you to power your lights from the second switch.
Where does the blue wire go in a socket?
left
The wires. In a plug, the blue neutral wire goes to the left, the brown live wire to the right and the green and yellow striped earth wire to the top. The fuse fits next to the live wire.
What do you need to know about a wiring diagram?
A wiring diagram is a simple visual representation of the physical connections and physical layout of an electrical system or circuit. It shows how the electrical wires are interconnected and can also show where fixtures and components may be connected to the system. When and How to Use a Wiring Diagram
Can a blue decoder be connected to a red ground wire?
When installing, you can choose to do it one way or another, but do not attempt to use a blue wire AND a red or black ground wire for lighting in the same installation or damage may occur. Decoders damaged in this way are NOT covered by warranty. Need a blanking plug for an 8-pin NEM652 DCC-wired loco? That’s a simple job!
What kind of wire is used for com-bination?
BLUE WIRE – this is the COMMON wire for all functions. It is used as the common return wire with all of the other accessory or lighting wires. The blue wire is always POSITIVE and is used in com- bination with all active functions.
What are the colors of a fan wire?
3 pin and 4 pin Fan Wire Diagrams Pin Name Pin Name Color Color 1 Ground Black Black 2 +12v Red Yellow 3 Tach/Signal/Sense Yellow Green 4 Control/PWM Blue Blue
Where can I get a good wiring diagram?
The industries best! 203,000 online wiring diagrams. Mitchell1 (R) obtains wiring diagrams and technical service bulletins, containing wiring diagram changes, from the domestic and import manufacturers. These are checked for accuracy and are all redrawn into a consistent format for easy use.
Is there a blue / blue connector for a c1500 LM7?
C1500 LM7 I heard about the IAC driver but I do know that the original wiring was green/blue connector and has the IAC and TPS are wired into the main harness but I do have a idle problem that could be explained by that IAC driver issue which is why I would like to try a red/blue connector PCM.
What does a data link connector diagram show?
The Data Link Connectors wiring diagrams show the circuits by which the various on-board computers exchange information, and the diagnostic connectors used for diagnosis and their location. The Ground Distribution wiring diagrams show all vehicle ground points, their location, and the components common to those ground points.
Can a red / blue plug be used on a green PCM?
I know this green/blue connector PCM was primarily used with drive by wire setups and so I would like to try changing my wiring to run a red/blue plug 12200411 older PCM that was used with cable operated throttle bodies to see if I can get this thing to idle correctly. Everything else I have tuned in and runs very strong but this idle is annoying.