What is side stand indicator?
The side-stand detector includes an inductive sensor configured for attachment to the two-wheel vehicle to detect at least one position of the side stand; and a circuit connected to receive an output from the inductive sensor and to provide a signal that reflects the position of a side stand.
What is side stand engine cut off?
The side-stand cut-off system switches off the engine when the side stand is on. While some Indian OEMs have an indicator for the side-stand, KTM, Hero MotoCorp, TVS Motor Co and Honda have implemented such a kill switch in some of their products.
What is automatic side stand?
Abstract— The side stand is used for supporting a parked motorcycle. If the rider may forget to retract the side stands before riding, then the undistracted stand hitting the ground and affected the riders control during the turn.
How does a side stand switch work?
The side stand switchs output is a small yet vital signal that needs to be monitored by the motorcycle’s ECM. When a gear is selected and the rider prepares to move away, the engine will automatically stall if the side stand is in the lowered position.
Does Activa 125 have metal body?
Honda Motorcycle & Scooter India had unveiled the new Activa 125, the company’s first BS6 two-wheeler with silent start, in June 2019. Honda Activa 125 BS6 gets full metal body. It will come with telescopic front suspension and 3-step adjustable rear suspension. There will be CBS (Combi-Brake System) with equalizer.
What is engine cut off sensor?
Four in each tank, known as engine cutoff – ECO – sensors, are part of a backup system intended to make sure the ship’s engines don’t run too long, draining the tank dry with potentially catastrophic results, after other problems that might prevent an on-time shutdown.
How much mileage does Dio give?
Key Specs of Dio BS4
| Engine | 109.19 cc |
|---|---|
| Torque | 8.91 Nm |
| Mileage | 55 Kmpl |
| Brakes | Drum |
| Tyre Type | Tubeless |
What is stand alarm in bikes?
This is a safety measure that is intended to prevent one from riding away with the side stand still down. This prevents the rider as well the vehicle to lose the centre of gravity by imbalance or surface hindrance and thereby saves the rider from an accident.
What is a bicycle sprocket?
A sprocket, sprocket-wheel or chainwheel is a profiled wheel with teeth that mesh with a chain, track or other perforated or indented material. The name ‘sprocket’ applies generally to any wheel upon which radial projections engage a chain passing over it.
How do you turn off a kickstand sensor?
If you don’t have this on your bike, the vehicle will completely turn off while it’s in use. To do this, unplug the switch that is the kickstand safety switch. There will be two electrical tabs in this, stick a screwdriver in them to remove the wires from each side.
Is Ntorq plastic body?
Plastic or Iron – NTORQ?…TVS NTORQ 125 Variants.
| Variant | Ex-Showroom Price |
|---|---|
| NTORQ 125 Disc BS6 | Rs. 77,725 |
| NTORQ 125 Race Edition BS6 | Rs. 81,225 |
| NTORQ 125 Super Squad Edition | Rs. 83,825 |
| NTORQ 125 Race XP | Rs. 85,025 |
What do the symbols on a car indicator mean?
Click Vehicle lighting symbols are connected to your car’s lighting system. These symbols are usually blue, green, or yellow in colour. Indicator light means that the vehicles dipped beam is on. Click Indicator light means that there is an exterior light on the vehicle that is not functioning properly.
When does an indicator light turn on in a car?
Indicator light turns on when the front airbag is switched off. If this lamp lights up or flashes there is a fault in the airbag or seatbelt system.
Why are the direction indicators on the same side of the car?
All the direction indicators on the same side of the vehicle have to work synchronously. Depending on the requirements, there are different functional controls for monitoring the indicator system (single-circuit, dual-circuit control). The arrangement is the same as for the front direction indicators.
When does the handbrake indicator light turn on?
Indicator light turns on when the handbrake is on. If it lit continuously, it means that hydraulic pressure has been lost in one side of the brake system or that the fluid level in the master cylinder is dangerously low (due to a leak somewhere in the brake system). Click Your vehicle’s dashboard light plays an important role.