What is Mode 06?
Mode 6 is defined as test results and other component/system monitoring. Some of these tested systems and components include the oxygen sensors, the catalytic converter, and the evaporative emission control system (EVAP). Mode 6 is where the engine computer stores all of the results from these tests.
Which operating mode of the OBD II system shows current data?
Mode $02… Mode $02 provides the data stored at the time the fault was detected by the OBD-II and when the OBD-II system turned on the MIL. Mode $02 output only shows the data from when the code set or matured and caused the MIL.
What does mode$ 06 do on a car?
Mode $06 is often the key to solving no-code driveability and emission faults, to identifying sensors and other components that are still operating within acceptable limits but are on the verge of failure, and for reducing comebacks involving the catalytic converter, EVAP system and EGR system repairs and engine misfires. WHAT IS MODE $06?
What does mode$ 06 mean in ECM?
First, Mode $06 (the dollar sign simply denotes a hexadecimal number, and is used by the ECM to ID the test) is a listing of the individual tests and results the ECM uses in running the non-continuous monitors like EGR, EVAP, and catalyst efficiency.
What can mode 06 data be used for?
The Mode 06 data can be used to verify repairs and to make sure there aren’t any other “hidden” faults waiting to turn on the MIL lamp after a vehicle leaves.
Where do I find the mode 06 number?
The trick is finding the Mode 06 information in the scan tool menu, and then figuring out what it means. The problem is most scan tools display Mode 06 data in hexadecimal code. Hexadecimal code is a 16 digit numbering system that goes as follows: 0, 1, 2, 3, 4, 5, 6. 7, 8, 9, A, B, C, D, E, F.
What do you need to know about mode$ 06?
The bottom line is that Mode $06 is an advanced diagnostic mode that allows technicians to peer deep into the inner workings of the OBD II system. It requires a scan tool that can access and display the TID and CID test results, and an understanding of the data that is displayed.
First, Mode $06 (the dollar sign simply denotes a hexadecimal number, and is used by the ECM to ID the test) is a listing of the individual tests and results the ECM uses in running the non-continuous monitors like EGR, EVAP, and catalyst efficiency.
Why is mode$ 06 in hex code?
The “$” symbol means the data is in hex code, not ordinary decimal numbers. The fact that Mode $06 data is in hex code means it has to be converted into familiar decimal values for us to understand it. This requires some math and conversion factors, or scan tool software that can do the translation for you.
What does mode$ 06 mean on OBD2?
Mode $06 data is information the OBD2 system tracks and compiles on “noncontinuous” monitors. It is tabulated in hexadecimal code (a base 16 number system that uses digits 0 to 9 plus letters A through F), which is the computer language that the PCM uses to manage things.