What is fault code 203d17 for Mercedes R320 BlueTEC?
Unless fault code 203D17 means the heater and the level sensor has a problem. They don’t know which one and they have to replace them both? I have a 2009 R320 bluetec with 49000 Miles. I have the check engine light with P20BE code. I have taken the car to a mechanic and he said that it’s Adblue heater malfunction.
What is the fault code on a Mercedes?
I called the dealer, Autobahn Motors Mercedes-Benz in Belmont, CA and they told me I had to bring it in because the Mercedes scanner gives the “correct” codes. The dealer reported fault code 203D17: “Found Add Blue Tank Internal Failure” (At a cost of $185).
What does AdBlue warning on Mercedes Benz mean?
It could mean many different things. Check the gas cap seal/how it tightens, definitive diagnose have someone scan vehicle with MB DAS (MB diagnostics). May be an oxygen sensor or although youve replaced the sensor, the system setting for that sensor has not been reset.
Is there an OBD-2 scanner for Mercedes Benz?
You can NOT diagnose them with a simple OBD-2 scanner. To read these systems and their fault codes or erase them from your Mercedes-Benz you need more advanced OBD-II scanners. Top 3 OBD-2 code readers for Mercedes-Benz have been listed under the green column below. 1. OBD II Code Reading Scanners – For ECU Only 2.
What does the trouble code p203d stand for?
P203D is the trouble code defined as “Reductant Level Sensor Circuit High” and indicates an unexpected high electrical reading from the sensor circuit as detected by the ECM. A reductant DEF tank:
Unless fault code 203D17 means the heater and the level sensor has a problem. They don’t know which one and they have to replace them both? I have a 2009 R320 bluetec with 49000 Miles. I have the check engine light with P20BE code. I have taken the car to a mechanic and he said that it’s Adblue heater malfunction.
I called the dealer, Autobahn Motors Mercedes-Benz in Belmont, CA and they told me I had to bring it in because the Mercedes scanner gives the “correct” codes. The dealer reported fault code 203D17: “Found Add Blue Tank Internal Failure” (At a cost of $185).
How much does it cost to repair a p203d sensor?
Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins. The cost of diagnosing the P203D code is 1.0 hour of labor. The auto repair labor rates vary widely across the country, and even within the same city. Most auto repairs shops charge between $75 and $150 per hour.
What is the fault code on a Mercedes R320?
CONFIRMED”. I called the dealer, Autobahn Motors Mercedes-Benz in Belmont, CA and they told me I had to bring it in because the Mercedes scanner gives the “correct” codes. The dealer reported fault code 203D17: “Found Add Blue Tank Internal Failure” (At a cost of $185).
Is there a way to reset a DTC code?
Drivetrain DTC codes are not accessible through the CC system. And most of the transmission codes cannot be reset through the OBD-II port. SDS, Snap-On, carsoft, etc. are the only way to clear them out.
How do you delete error codes on Mercedes Benz?
Push right AUTO button and see if there are any errors (like b1416 on the left). If there aren’t any it should display FF (in deutsch – Fahler Frei (No Errors)). You can search through the list by pressing the AUTO buttons. You can ALSO DELETE ERRORS by PRESSING SIMULTANEOUSLY BOTH AUTO buttons.
What is the trouble code for the reductant level sensor?
The reductant level sensor communicates to the ECM the DEF fluid level present in it’s storage tank. P203D is the trouble code defined as “Reductant Level Sensor Circuit High” and indicates an unexpected high electrical reading from the sensor circuit as detected by the ECM. What is the severity of this DTC?
What is the severity of the trouble code p203d?
P203D is the trouble code defined as “Reductant Level Sensor Circuit High” and indicates an unexpected high electrical reading from the sensor circuit as detected by the ECM. What is the severity of this DTC? I would say this is a fairly minor code considering the possibilities.
What is the oil level sensor on a Mercedes Benz?
Below you will find step by step instructions with pictures on how to remove and install a new engine oil sensor on a Mercedes Benz engine. Part numbers related to the oil level sensor are shown below and there could be more. The purpose of the the oil level sensor (B40) is to measure the oil level but also oil temperature and the oil quality.
How many suspension height sensors does a Mercedes Benz have?
Mercedes Suspension Ride Height Level Sensor. By MercedesMedic, 19 November, 2019. Mercedes-Benz vehicles equipped with airmatic suspension have three to four Suspension Height Level Sensors. Input from these sensors is used by the airmatic suspension to automatically self-level the vehicle height based on the vehicle load.
Where is the ride height sensor on a Mercedes Airmatic?
If you are experiencing problems with the airmatic, always start by checking the ride height level sensor links. Remove the front two wheels and inspect the suspension level sensor mounted next to the upper control arm. You have level sensors at each front strut.
CONFIRMED”. I called the dealer, Autobahn Motors Mercedes-Benz in Belmont, CA and they told me I had to bring it in because the Mercedes scanner gives the “correct” codes. The dealer reported fault code 203D17: “Found Add Blue Tank Internal Failure” (At a cost of $185).
What are the symptoms of a p203d diagnostic code?
Symptoms of a P203D diagnostic code may include: Incorrect DEF (Diesel exhaust fluid) level reading Exhaust emissions outside of specifications CEL (Check engine light) on “Low” or other DEF warning on instrument cluster What are some of the common causes of the code?
Where can I find the Mercedes Fault code?
Any of the scanners listed above can read and clear the Check Engine / Service Engine Fault Codes. The codes above are retrieved by plugging a diagnostic scanner into the OBD-II port located under the dash, and scanning for fault codes. Location of OBD II port used to retrieve Mercedes-Benz fault codes.
How to find out if your car has a p203d code?
Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins. The cost to diagnose the P203D code is 1.0 hour of labor. The auto repair’s diagnosis time and labor rates vary by location, vehicle’s make and model, and even your engine type.
Symptoms of a P203D diagnostic code may include: Incorrect DEF (Diesel exhaust fluid) level reading Exhaust emissions outside of specifications CEL (Check engine light) on “Low” or other DEF warning on instrument cluster What are some of the common causes of the code?