What happens when you remove the key from the ignition?

Car Engine Doesn’t Turn Off When Removing Key or Pressing STOP It is a strange problem to have a car that won’t turn off when you remove the key from the ignition or press the Engine Stop button. Your engine will continue to run even when you remove the key from the ignition because the fuel pump is not shutting off.

What does it mean when the key won’t come out?

What I mean is you can change the gears without pushing the button on the side of the gear shifter so I didn’t know if this may be the problem since the key won’t cut off or come out if the car is not in park. My car has 999999 miles. My car has an automatic transmission. It is either the ignition switch electrical or the ignition lock cylinder.

What should I do if my car key won’t come out?

Any car key in an ignition should easily slide out after you have completely rotated it counterclockwise and (if applicable) pushed the key release button. If the key won’t come out of the ignition, then you need to understand the possible cause of this problem. There are a variety of reasons as to why your car key won’t come out.

Why does my car stop when I press the stop button?

On vehicles equipped with the Start/Stop convenience feature, the engine may not stop when you press the STOP button. A defective Push Start button can cause this problem. If the button stops working, it may need to be replaced.

What does it mean when your key is stuck in the ignition?

Key is stuck in the ignition and won’t turn all the way b… My key has been stuck in the ignition for a few weeks now and it’s still been cranking up until yesterday. Turn the key and nothing. From what I’ve read it could be the ignition switch gone bad but I just noticed also that the gear shift does not totally lock into park.

What should I do if my ignition switch is not working?

How To Fix It: After ensuring the rest of the electrical system is intact, such as fuses, relays, and circuits, replace the ignition switch. The transponder antenna surrounds the ignition cylinder. If it doesn’t recognize the transponder key, it doesn’t allow the engine to run. https://www.gettyimages.com/license/525320791

Why is my car not turning on when I Turn on the ignition?

Of course, if you access the car itself with your key, you likely won’t be able to turn on the ignition because of all those extra tumblers. And on the off chance that you do turn the ignition cylinder, the immobilizer won’t allow you to start the car, because it’s protected by one-in-millions of transponder codes.

What happens if you have an incorrect ignition code?

The chip in the key transmits a specific code, of which there are millions. If this code matches the ones programmed into the vehicle, engine starting is enabled. An incorrect key code, such as from an unprogrammed key or damaged key, would prevent engine starting. Code “confusion,” such as having multiple keys can also occur, preventing ignition.

What to do if your ignition switch won’t work?

Step 7 – In extreme conditions such as high mileage or a key chain adorned with many ornaments can wear the tumbler which causes the key not to work. If the door key is same as the ignition key, the door tumbler can be removed and a key made if no security chip is installed, (older cars).

What happens if you turn off the engine without a key?

The ignition cylinder is mechanically connected to the steering wheel lock, so a potential thief cannot steer the car without the key. If you turn off the engine with the steering wheel turned or turn the steering wheel after turning off the engine, the steering wheel lock can bind and prevent you from turning the ignition.

What to do if your car key wont turn in the ignition?

As long as you can get your key out when your car key won’t turn in the ignition, you should be able to investigate the car key. Try a spare car key, and see if a different key will work. Compare the car key that won’t turn in the ignition. Look at the bitting on the blade of the key for any wear. Examine for any twists, bends, or breaks.

What to do if your ignition cylinder is worn out?

How To Fix It: Fortunately, this is an easy fix. Just turn the wheel back and forth until the ignition cylinder is freed. It’s a fact of life that mechanical things tend to wear out, and the same goes for mechanical keys and key cylinders used in your car’s ignition system.

Why is my key not turning in ignition?

The three main reasons why an ignition key will not turn include: problems with related components, issues with the key itself, and ignition lock cylinder problems. Tip: Always make sure your parking brake is on to keep the vehicle secure when following these steps.

Can’t Put key in ignition?

As dirt is the major reason for the key not getting into the ignition , chances are that a few fragments might have stuck to the pins of ignition cylinder. Insert the key into the port as much you can and softly slide it back out. Go through the entire process numerous times until the key gets into the port completely.

Why are my car keys stuck in ignition?

7 Reasons a Car Key Gets Stuck in the Ignition #1 – Parking Gear Not Set #2 – Steering Wheel Lock #3 – Debris on Key #4 – Dead Battery #5 – Worn or Damaged Key #6 – Damaged Ignition Cylinder #7 – Manufacturer Recall or TSB

What is ignition lock key?

The ignition lock cylinder is the cylindrical tumbler and key that is used to power on and start the vehicle. While many newer vehicles are now being manufactured with push button and keyless power and starting systems, traditional ignition lock cylinders are still commonly found on many road going cars and trucks.

Why does my car not start when I turn the key?

Without an adequate charge, a car battery will be too weak to start your vehicle when you turn the ignition key. Modern-day autos always are drawing a small amount of power from the battery, even when the car has been shut off.

Can a keyless ignition car be left running?

That was to prevent people from exiting their (really quiet) vehicles before shifting into park, because some people got killed by lurching cars. So hangovers from that regulation prevent this, oddly. Also, Technical limitations means that it can also only check infrequently, i.e. when you close a door and try to turn off the vehicle.

Can a car run after the ignition is turned off?

We’ve all heard a car continuing to run after the ignition key has been turned off, and it usually sounds pretty bad, with all kinds of clonking and coughing noises. These days, though, you’re more likely to hear this in the movies, when sound-effects staff is trying to show the viewers what a clunker this particular actor is driving.

Why does my car key not turn in?

A very common reason a car key won’t turn in the ignition is that the keyway of the ignition cylinder is a little jammed up. Just lubricating the lock may be enough to solve your issue.

Can you turn off the engine in a keyless car?

In many models, you can turn the engine off with the transmission in any position, and in all keyless vehicles you can take the fob with you, leave the motor running, and it will not turn off, just because the key fob is out of range – contrary to what many believe. No, for that you need an engineered software solution.

What can I use to make my ignition key turn?

Purchase canned air from a local retail or office supply store and insert the straw from the nozzle directly into the key hole. Spray the canned air into the key hole in short spurts.

What causes the engine to turn over when the key is turned?

In order for your engine to crank and run, it must be turned over with force. This jump-starts air and fuel intake, compressing it in the process. The starter motor is an electrical component, and is responsible for turning the engine over when the key is turned in the ignition.

How do you change the ignition on a car?

Find the locking pin on your ignition assembly. Use a tool of the correct size to depress the lock pin. Pull the old ignition cylinder lose. You might need to shake the ignition cylinder loose or finesse it out of its housing. Insert your new key into the new ignition cylinder. Fit the new ignition cylinder into the housing.

Is there a problem with my Hyundai Getz?

I have a 2008 Hyundai Getz. I have experienced times when the vehicle won’t start. When you turn the key the motor kicks over but there is no ignition to start the vehicle. If you turn the key off and … read more

Why does my Hyundai Getz start when I turn the key?

The car sometimes starts when turning the key to the ON position and sometimes sounds like the starter is still engaged after … read more Vocational, Technical or Tra… Ma wife has a Hyundai Getz 2004, 1.6 automatic. The starter made problems since months, but the authorized Hyundai workshop ( in Malaysia ) did not change until last week.

Why does my GM ignition key not turn?

Sometimes the ignition key won’t turn or rotate. If that happens the vehicle won’t start, the steering wheel won’t turn and it won’t shift into gear. On a late 90’s or early 2000 GM vehicle this is the way to get it apart so you can replace the tumbler. Category Autos & Vehicles.

What to do if your car key won’t turn in?

Videos you watch may be added to the TV’s watch history and influence TV recommendations. To avoid this, cancel and sign in to YouTube on your computer. Welcome to Despair Repair, This is a channel dedicated to drivers and car owners who want to make some simple diy repairs and maintenance around their cars.

What to do if your car key won’t turn?

My car has 116000 miles. Hi there – your symptoms suggest the key tumbler – the actual lock portion of the ignition switch – has a stuck pin/spring combination. I suggest squirting a bit of dry graphite lubricant into the key opening, then insert the key and work at turning the key.

Why does my Saturn key not turn in?

The Saturn ignitions tend to stop turning because of worn keys and worn ignitions. (mostly worn ignitions) Vehicles Affected The GM (Buick, Cadillac, Chevy, GMC, Hummer, Oldsmobile, Pontiac) ignitions tend to fail because of wear from inserting the key at a slight angle.

Why does my steering wheel not turn when I turn the key?

Turn the Steering Wheel The most common reason that a car key will not turn is that the steering wheel has locked. This will happen when the steering wheel has been moved after the key has been removed from the ignition cylinder. Turn the steering wheel to the right and left.

What to do when your Hyundai Sonata key wont turn?

Put key in ignition and while turning key, press brake petal and turn steering wheel to the right ( all at same time ) and Walah it’s unlocked! Abracadabra * 166 people found this helpful. Hyundai keys wear down a lot faster than other manufacturers.

What happens if your car key is worn out?

Keys that are worn out are actually very common, particularly on older vehicles. If your vehicle key is worn out, this will not allow the pins inside of the cylinder to drop correctly and start the car. If you have a spare key, try to use that first.

What happens to the engine when you turn the key?

Turning the engine causes the pistons to rise and fall in the engine block, activates fuel and spark, and (hopefully) ignition of the engine so that it begins running on its own without the starter motor turning it.

What happens when I Turn on the ignition?

I have a 2006 Ford Focus and I recently replaced the battery. Everything comes on dashboard, lights, radio, etc. Then when I turn the key to ignition the lights kind of flicker and then nothing! Everything goes dead, I tried turning the key again after that happens and nothing all dead.

How can you tell if your ignition key is locked?

Check to see if your steering wheel is locked by trying to turn the wheel. If it will not move, or moves only very slightly, it is likely locked. A locked steering wheel will not allow the ignition to engage. When you move the wheel back and forth, you will feel it stop abruptly as it comes into contact with the steering wheel lock.

Can a unworn key turn an ignition cylinder?

Or, an unworn key may not turn a worn ignition cylinder, as they haven’t “worn together.” How To Fix It: The best way to do this is to get a new lockset, with new keys and a new cylinder. You might consider getting a matched lockset that includes the door and trunk cylinders.

How can I get a new ignition key?

Depending on the vehicle, the dealership may be able to produce a new key using your vehicle’s VIN number. You will need to provide sufficient evidence of ownership of the vehicle. If a new key cannot be produced, you will need to purchase a new ignition module with matching key and have it installed.

A very common reason a car key won’t turn in the ignition is that the keyway of the ignition cylinder is a little jammed up. Just lubricating the lock may be enough to solve your issue.

What does it mean when my key will not turn in my ignition?

Inspect the key for damage. If your key won’t turn when you insert it into the ignition, it may be because the key has been damaged and no longer engages the correct pins to the depth necessary to spin the cylinder. Examine the key for signs of excessive wear, rounding or broken teeth.

What to do when the ignition key won’t turn?

Method 1 of 3: Checking for Common Issues. Ensure the vehicle is in park.
Method 2 of 3: Resolving Issues with the Key. Pull the key out slightly before turning it.
Method 3 of 3: Addressing Issues with the Ignition Cylinder. Use canned air to clean the ignition port.

What if the key won’t go in the ignition?
- Ensure the vehicle is in park. Vehicles equipped with an automatic transmission are designed not to start if the transmission is not in park or neutral.
- it may be because the key has been damaged and no longer
- Ensure there is nothing stuck to the key.
  
  Why does my car keep running after I remove the key?
  
  Here are the most common problems that cause the engine to keep running even after removing the key from the ignition or press the STOP button. The ignition module may fail, or if your car is equipped with an Engine Push to the Start button, the Keyless module could be the culprit.
  
  Can a car still start when the ignition switch is out?
  
  Yes, ignition SWITCH. In the interim, when you notice the car still running, try just wiggling the key to see if it moves the switch enough to shut off. Plan now to replace the switch. Most customers in the shop do not realize that the KEY CYLINDER is not the ignition SWITCH. ( Many of them come to my counter asking for a ‘’ key switch’’.
  
  How often should you insert and remove the ignition key?
  
  You may insert and remove the ignition key thousands of times every year, wearing the key and tumblers ever-so-slightly every time. Heavy keychains can add more stress to the ignition cylinder, increasing wear. After a while, the key may fall out of the cylinder or be unable to turn out of the lock position.
  
  Can a car still start when the ignition is out?
  
  Yes, ignition SWITCH. In the interim, when you notice the car still running, try just wiggling the key to see if it moves the switch enough to shut off. Plan now to replace the switch. Most customers in the shop do not realize that the KEY CYLINDER is not the ignition SWITCH.
  
  Why does my car keep running after the ignition key is out?
  
  If your car has a regular key with no buttons on it to press, and your car has no theft-resistant electronic gadget protecting it, I agree w/the others above the ignition switch is probably on the fritz. If not that, probably a sticking engine main relay.
  
  How to program an extra ignition key ( updated )?
  
  Within ten seconds of removing the key, insert the new key and turn it to the “on” position. Within ten seconds, depress and release the accelerator pedal once. The security light will then flash for 60 seconds and then turn off. When the security light stops flashing the programming should be complete.
  
  What to do when your car won’t start?
  
  If this does not work, rock the steering wheel as you jiggle the key in the ignition. You can mix and match with the methods of turning the wheel and moving the key. As soon as the key turns the steering wheel will unlock, and the car should start. If the key does not turn, then you may have a more severe issue.
  
  Can’t Get key in ignition?
  
  A common problem when your key is stuck in the ignition is that the car battery is dead or low on voltage . Charge your car battery for some time with a car battery charger to see if it’s a low voltage problem. Low voltage can cause the ignition lock not to release the key.
  
  How do you replace a car ignition key?
  
  Take your new key to a factory dealer, preferably one who sells your make and model. Tell them you lost your ignition keys and need a replacement. The dealer can cut a new key and have it programmed on-site to work with your car and ignition.
  
  Why does my diesel engine keep running after I Turn Off the key?
  
  When you turn the key off on your Mercedes diesel, you may have noticed that the engine will not quit immediately. In some cases it may even keep running a second or two after you have turned the key to the off position before it finally quits. That alone should give you a clue that a diesel engine uses a different approach to shutting down.
  
  Why does my car run when the ignition is turned off?
  
  With the ignition turned off and the car continuing to run, simply remove the plug from the alternator (DO NOT TRY AND REMOVE THE BATTERY POWER WIRE FROM THE POWER STUD!) and the car should shut off if the alternator is creating the problem. If it does not stop running, your feedback problem is coming from something other that the alternator.
  
  What happens when you turn off the engine on a Mercedes?
  
  When you turn the key off on your Mercedes diesel, you may have noticed that the engine will not quit immediately. In some cases it may even keep running a second or two after you have turned the key to the off position before it finally quits.
  
  What to do if your engine keeps running after you turn off the ignition?
  
  If your engine keeps running after turning off the ignition key, try to troubleshoot and repair the fault as soon as possible. Dieseling can cause serious engine damage if the problem worsens. Check the different systems and components as outlined above.
  
  Yes, ignition SWITCH. In the interim, when you notice the car still running, try just wiggling the key to see if it moves the switch enough to shut off. Plan now to replace the switch. Most customers in the shop do not realize that the KEY CYLINDER is not the ignition SWITCH.
  
  With the ignition turned off and the car continuing to run, simply remove the plug from the alternator (DO NOT TRY AND REMOVE THE BATTERY POWER WIRE FROM THE POWER STUD!) and the car should shut off if the alternator is creating the problem. If it does not stop running, your feedback problem is coming from something other that the alternator.
  
  Here are the most common problems that cause the engine to keep running even after removing the key from the ignition or press the STOP button. The ignition module may fail, or if your car is equipped with an Engine Push to the Start button, the Keyless module could be the culprit.
  
  What should I do if my car won’t turn off?
  
  With the ignition turned off and the car continuing to run, simply remove the plug from the alternator (DO NOT TRY AND REMOVE THE BATTERY POWER WIRE FROM THE POWER STUD!) and the car should shut off if the alternator is creating the problem.
  
  Can a bad ignition switch cause a car not to start?
  
  However, if your car has ignition switch problems, you may not be able to start the car at all. Ignition switch problems can also cause issues on the road, such as unexpected shutdowns or electrical problems.
  
  What are the symptoms of a bad ignition lock cylinder?
  
  Some of the common symptoms of a damaged or broken ignition lock cylinder include the vehicle not starting or power not supplied to the vehicle when the ignition is turned. Most modern cars that have keyless remote starting have a key that has a computer chip inside of it.
  
  Why does my car run after I Turn Off the ignition?
  
  Our certified mechanics come to you · Backed by our 12-month, 12,000-mile warranty · Get a fair and transparent estimate upfront We’ve all heard a car continuing to run after the ignition key has been turned off, and it usually sounds pretty bad, with all kinds of clonking and coughing noises.
  
  How does the fuel pump know when to shut off?
  
  Some vehicles can vary the voltage to the fuel pump to control fuel pressure. In the case of an accident, there are many crash sensors on modern cars that the PCM will monitor. When an accident has been registered, the PCM has the option to cut power to the fuel pump by turning off the fuel pump relay. Was this answer helpful?
  
  What happens to auto stop start when the hood is closed?
  
  As it turns out, engine auto-stop-start does not operate if the car is started with the hood open. Moreover, the system remains off even after the hood is closed, effectively disabling the system from functioning until the next key cycle. For those who despise the system, this could be welcomed knowledge.
  
  Why does my car stall when I Turn Off the engine?
  
  Cars made since about 1974 have emissions equipment that can fail and cause stalling. Some common offenders include the exhaust gas recirculation (EGR) valve and catalytic converter. If the EGR valve is stuck open, it will allow too much exhaust gas to enter the engine.
  
  Why does my car keep running after I Turn Off the ignition?
  
  Running-on is when the engine continues to turn after you’ve switched off the ignition because the fuel /air mixture is being ignited by a hot-spot in the combustion chamber.
  
  What happens when the ignition switch is off?
  
  Generally speaking, in the “OFF” position, the ignition switch doesn’t connect anything; in the “ACC” position, the radio or fan may be energized; in the “RUN” position, the engine control module is energized; and finally, in the “START” position, the starter relay is engaged. (These generalizations, depend significantly on year, make, and model.)
  
  Can a misfire cause a car to stall?
  
  If there are contaminants or water in the fuel, a misfire can occur. That is when the spark plug isn’t able to fire or the fuel in the engine isn’t able to burn. It can cause a stumble, or can cause the engine to stall if it happens consistently. Your engine can stall if it is being starved of fuel.
  
  How to turn off the ignition in a car?
  
  Stopping the Engine/OFF (No LED Lights): When the vehicle is stopped, press the engine START/STOP button once to turn the engine off. If the vehicle is in P (Park), the ignition will turn off, and Retained Accessory Power (RAP) will remain active.
  
  What’s the difference between push button ignition and keyed ignition?
  
  The only real difference between a push-button start system and a conventional keyed ignition is that you don’t need a key to close the circuit on the ignition. The button does that. Pushing the button does the same thing that turning the key does.
  
  What happens when you push the starter button?
  
  The starter turns until the engine cranks whether you are pressing the button or not. if you press the circular arrow part of the button without holding the clutch the ignition will not crank the engine but will put the ignition in the “ON” position like a traditional key ignition.. this is different than the accessory mode..
  
  How are the buttons set in the ignition?
  
  For example, if you have three buttons, Hand, Off, and Auto, not only can they set those modes, but their background color can display the current mode, although you’d be better off using the Multi-State Button for this. To get buttons to do things, you add an event handler to the actionPerformed event.
  
  Can you remove the ignition key on a GMC Acadia?
  
  Make and Model > GMC Trucks > Acadia > Can’t remove the key from… Diagnose and fix GM to correct situation where you can’t remove the key from ignition If you encounter a situation where you can’t remove the key from ignition on a GM vehicle, you have lots of company.
  
  How do you get a bad key out of a car?
  
  Try gently wiggling the key by hand as you try to pull it out. Apply some WD-40 or graphite between the key and the lock, if you can. If you do get the bad key out, try using your spare ignition key, which should be in newer, better condition.
  
  Can You unplug a fuse on a car?
  
  Unfortunately, simply unplugging a fuse isn’t going to stop a determined thief, as they often tow cars away rather than going to the noise and effort of trying to start them…
  
  Is it OK to pull fuel pump fuse?
  
  I’d also rather not pull the fuel pump fuse or relay, because that seems like a recipe for coming back to a dead battery should the car be targeted.
  
  Can a blown fuse cause a starter to not start?
  
  Blown fuse – Sometimes the simplest explanation is the best one. A blown fuse in the starter circuit could be the cause of a no-start problem. Broken or corroded wiring – Damaged or dirty wires to the battery or to the starter solenoid (or wires that are loose) can prevent sufficient power from reaching the starter.
  
  Unfortunately, simply unplugging a fuse isn’t going to stop a determined thief, as they often tow cars away rather than going to the noise and effort of trying to start them…
  
  I’d also rather not pull the fuel pump fuse or relay, because that seems like a recipe for coming back to a dead battery should the car be targeted.
  
  Why does my car not start when I put the key in?
  
  Putting the key in the ignition switch and starting the car feels like second nature. However, if your car has ignition switch problems, you may not be able to start the car at all. Ignition switch problems can also cause issues on the road, such as unexpected shutdowns or electrical problems.
  
  What happens when you turn the key on a car?
  
  The higher rate of electricity gives the starter motor more “oomph” to turn the engine over. The process of starting the car begins at the ignition switch in the driver’s cockpit. The key turn completes a small circuit that tells the battery to release power to the starter solenoid.
  
  Why do I have to turn the ignition back and forth?
  
  This is what sends the security data to the Body Control Module (BCM) to allow the car to start. This part failing is very common on this car. If there is no security warning, then this is a possible ignition switch problem. This would explain turning the ignition back and forth several times. This action will usually cause a bad switch to correct
  
  How does a key turn work on a starter motor?
  
  The key turn completes a small circuit that tells the battery to release power to the starter solenoid. The solenoid ramps up the power given to it and that power causes the starter motor to turn very quickly.
  
  Why does my car not start when I Turn on the ignition?
  
  The car will not start when the ignition is turned all the way over. The battery is fine and I think it is a switch problem. Sometimes I can leave it alone for a few hours and it will fire right up. Other times I just turn the ignition on and off about 5 or 6 times and it starts.
  
  How to fix a laptop key or put it back on?
  
  1 Insert the key pad into the retainer. 2 Once the above two steps are completed, position the key cap over the retainer in the proper orientation and press down… More
  
  How to fix a broken keyboard key cap?
  
  [Solution] How to Fix a Broken Keyboard Key Cap 1 Insert the key pad into the retainer. 2 Once the above two steps are completed, position the key cap over the retainer in the proper orientation and press down lightly. The key should See More….
  
  How To Fix It: After ensuring the rest of the electrical system is intact, such as fuses, relays, and circuits, replace the ignition switch. The transponder antenna surrounds the ignition cylinder. If it doesn’t recognize the transponder key, it doesn’t allow the engine to run. https://www.gettyimages.com/license/525320791
  
  Why does the key not come out of the ignition?
  
  Sometimes, the steering column can lock in a position that puts pressure on the ignition switch, and prevents the key from coming out of the lock when you pull on it. Solution: Grip your steering wheel and try to move it back and forth.
  
  What happens if you break the ignition lock?
  
  The key slides into the ignition lock cylinder. These two components mate together and essentially become one. So if either of them break, they will both be affected. In addition, there are many other small moving parts inside your steering column that are activated when you insert the key and turn it.
  
  What makes the chime on the ignition go off?
  
  The functions that provide an audible warning are the key in ignition, the lights on, the occupant restraint (seat belt) and the park brake. The BCM will provide an audible chime if the key is left in the ignition in either OFF or the accessory position with the driver’s door open.
  
  Running-on is when the engine continues to turn after you’ve switched off the ignition because the fuel /air mixture is being ignited by a hot-spot in the combustion chamber.
  
  What causes an engine to run with the key off?
  
  • A leak on the IP BEC could cause various electrical concerns such as: Engine Continues to Run with Key Off/Possible No Crank/No Start/Communication Loss/Various Electrical Concerns. • This leak may also cause some communication issues between certain electrical modules due to water dripping on the IP BEC.
  
  Yes, ignition SWITCH. In the interim, when you notice the car still running, try just wiggling the key to see if it moves the switch enough to shut off. Plan now to replace the switch. Most customers in the shop do not realize that the KEY CYLINDER is not the ignition SWITCH. ( Many of them come to my counter asking for a ‘’ key switch’’.
  
  Can you turn off the engine without the ignition?
  
  The ignition in my 98 has been acting weird for some time. I can pull the key from the ignition while the truck is running. If you are not careful, you can turn the engine off without putting the key in the off position. The key will come out in the accessory position and you can turn the ignition with no key and start the truck.
  
  • A leak on the IP BEC could cause various electrical concerns such as: Engine Continues to Run with Key Off/Possible No Crank/No Start/Communication Loss/Various Electrical Concerns. • This leak may also cause some communication issues between certain electrical modules due to water dripping on the IP BEC.
  
  Why does my tractor not turn off with the key?
  
  If it is, move on down the tractor harness making sure that any plug that wire goes into is secure. Eventually that wire will lead up to the ignition switch. It’s possible for the ignition switch to be the problem but I don’t think it’s likely because the seat switch isn’t doing what it should be doing.
  
  What does it mean when your car won’t turn off?
  
  It can be very frustrating when it doesn’t. If the engine continues to run just as before you turned it off – as if you hadn’t turned it off at all – your ignition and fuel system are not shutting down. In that case, your car has an electrical problem that needs to be addressed.
  
  What causes a car key to not turn?
  
  Examine the key for signs of excessive wear, rounding or broken teeth. Any of these could result in the key failing to turn in the ignition. If the key is damaged, it will have to be replaced.
  
  Why is my Honda ignition key not turning?
  
  This is a very common and known issue with Honda. Your key is not the issue, it is the wafers in the ignition. The wafers have small points on them which ride along the grooves of the key. When these points become worn, the wafers fall off of the key causing the issue you are describing. Good news. You do not need to replace your ignition.
  
  What to do if your car engine won’t turn off?
  
  In case it powers down, you need to replace the main relay. If no, move on to next troubleshooting step. Check the owner’s manual to determine if your car has a carburetor or fuel injection. If you own a fuel-injected car .i.e. dieseling, you might require replacing the dripping fuel injector.
  
  What kind of truck won’t shut off with a key?
  
  Won’t shut off with key. Data says key is in run position when key is off. Already verified the key switch is working correctly. I … read more I have a 2016 prostar International 9400 truck,with a cummins ISX engine.
  
  Why does the engine keep running when the key is turned off?
  
  The cooling fans, radio, heater fan, etc. shut off but the engine keeps running. Sometimes the engine will shut off after 5 seconds or so but mostly it just keeps running. Either way the battery dies over night (I dump the clutch to stall the engine). I checked the ignition switch and the ign1 ign2 and st relays, they are ok.
  
  When you turn the key off on your Mercedes diesel, you may have noticed that the engine will not quit immediately. In some cases it may even keep running a second or two after you have turned the key to the off position before it finally quits.

Navigation