What does the VSA light mean on a 2006 Honda Odyssey?
The VSA light is related to your vehicle’s traction control system and stands for “Vehicle Stability Assist” (VSA). The traction control system monitors the steering and stability of the vehicle and engages when loss of traction has been detected.
Why does the VSA light keep coming on on Honda Odyssey?
If it stays on, it is letting you know that there is some problem with the Odyssey’s VSA itself. When the light comes on, Honda suggests getting someplace safe and restarting the engine. If the VSA light doesn’t come back on, you are good to go. If it does come back on, it is time to diagnose the issue, or take it in to the shop. 2.
What to do when VSA light does not come on?
When the light comes on, Honda suggests getting someplace safe and restarting the engine. If the VSA light doesn’t come back on, you are good to go. If it does come back on, it is time to diagnose the issue, or take it in to the shop.
Can a Honda door open with the VSA light on?
If you turn the power door slide switch to OFF (see photo right), it is possible to manually open the door while the engine is running even with the ABS/VSA light illuminated. Note that the door will still close electrically with the engine running as long as the slide switch is ON.
How to fault reset Honda ABS and VSA?
Honda ABS / VSA Fault Reset Procedure: Turn the Ignition switch OFF and take the key out. Short pins 4 and 9 on the OBD connector located under the dash on the driver side. Now put your foot on the brake pedal and hold it down lightly while turning on the ignition switch to position “II” (all the dash lights come on, but don’t start it).
What is a VSA on a Honda Odyssey?
Your Honda Odyssey is designed with a (Vehicle Stability Assist) system which keeps you safe when driving conditions are hazardous. When the VSA light comes on, your Odyssey may need attention in order to get this important safety system up and running again. VSA is a system that helps keep you keep control in less than ideal driving conditions.
How do you reset the VSA on a Honda Odyssey?
Honda ABS / VSA Fault Reset Procedure: Turn the Ignition switch OFF and take the key out. Short pins 4 and 9 on the OBD connector located under the dash on the driver side. Now put your foot on the brake pedal and hold it down lightly while turning on the ignition switch to position “II” (all the dash lights come on, but don’t start it).
What does VSA on a Honda Pilot mean?
The VSA indicator stands for Vehicle Stability Assist, which is a standard system on most newer Honda models. The Honda Vehicle Stability Assist System with Traction Control helps sense and correct oversteering and understeering to improve cornering capabilities.