What does the power window on a Saab do?
Apart from controlling the power windows it also reads their status. Additionally, it controls and heats the driver’s door mirror motor and central locking system motor. It also illuminates all door buttons and the courtesy light installed at the bottom edge of the door.
What’s the price of a 1997 Saab 9000?
In the last year it has had a new fuel pump, new exhaust, new tires, new breaks 1997 Saab 9000 CSE 2.3 Turbo Fully Loaded $3000 For sale is a dark green 1997 Saab 9000 CSE 2.3 Turbo 4 door hatchback, fully loaded with 188K miles. This 5 speed vehicle has leather seats, power windows/locks/moonroof, am/fm tape …
What kind of locking system does a Saab have?
The car is fitted with a central locking system as standard, in which TWICE con- trols the central locking system motors. The central locking system can be oper- ated with a remote control unit, a key in the driver or passenger door or with a switch in the centre console.
Where are the switches located on a Saab 9-3?
The 2002 9-3 and 9-5 were fitted with a switch pack assembly housed in the center console which was a single unit. From 2004 onward the switch setup was totally changed with the DDM (Driver Door Module) type switches. These consist of both a microprocessor and switch which is located in the driver’s door. The two are clearly not interchangeable.
Why does my Saab 9-3 engine not start?
It really can get that one last start out of it. There are a lot of issues that can cause your 9-3 to crank, but not start. The engine needs air, fuel, and a spark in order to run. It is highly likely that if the engine is cranking, but not starting that it has thrown an OBDII code.
Why are my windows not working on my Saab?
Generally, when the windows do not respond to the switches it is a switch-related issue for which the switch will need to be bypassed. To isolate the switch, pry it gently out of the center console with a small flat-blade screwdriver. Once the switch is out it can be unplugged.
Where is the power window located on a Saab?
It is located inside a boot which runs through the door into the body to join with the main body harness. Whenever the door is opened and shut the harness is forced to bend causing the wires inside to flex as well. Over a period of time, after sustained flexing, some of the wires tend to break.
What are the non essentials in a Saab power window?
Non-essentials include power windows, heated seats, wipers and turn signals. However, there could be a problem with the ignition relay or ignition switch. Most often when electrical features begin to behave erratically it is a red flag for a failing ignition switch.
How do I close the window on my Saab 9-3 / 9-5?
Raise the window fully. Hold the button up during the entire operation. Wait for at least 1 second when the window is in the top position. 6. Lower the window fully. Hold the button depressed during the entire operation. 7. Raise the window fully. Hold the button up during the entire operation.
What are the non essential accessories on a Saab?
The circuit for non-essential accessories powers up only after the engine has started as they are not necessary when starting. By isolating them, optimum power is made available to the starter motor and other starting essentials during the starting process. Non-essentials include power windows, heated seats, wipers and turn signals.
Where are the switches located on a Saab power window?
No, this is not possible. The 2002 9-3 and 9-5 were fitted with a switch pack assembly housed in the center console which was a single unit. From 2004 onward the switch setup was totally changed with the DDM (Driver Door Module) type switches. These consist of both a microprocessor and switch which is located in the driver’s door.
Why are my electric windows on my Saab not working?
Electric windows can be extremely convenient, but when they don’t work, it can become a very frustrating and expensive problem. If your driver window (it also applies to all other windows) decided to go back down to about 2/3, guess it’s the Pinch protection feature .
How do you close a window on a Saab?
1. Close the window. (Saab Convertible: Close the door and soft top.) 2. Open the fuse box. To open the case, it must be pushed a bit in direction to the front wheels and than opened as the white part of the picture in shows. Reset the pinch protection by removing and fitting fuse F5 from the instrument panel electrical centre (IPEC).