What does the blue light on a Subaru Outback mean?
Referred to as the “Coolant Temperature Low Indicator Light or the Coolant Temperature High Warning Light” in the Subaru Owner’s Manual, this light will come on whenever you start your Subaru vehicle. Upon startup, your vehicle is preforming a temperature check.
What does the blue water light mean?
coolant
The Blue Light means that your vehicle is coolant is at a low temperature. The coolant which is otherwise known as an antifreeze is a fluid that is usually found in the vehicle is radiator. It helps the water in the radiator from freezing during winters and boiling off in the summers.
How long should you let your Subaru warm up?
30 seconds is plenty to let the oil circulate throughout the engine. Take it easy for the first few miles and you and your Subaru will be fine.
What does the brake warning light on a Subaru Outback mean?
Description: Depending on your model of Outback, this red warning light may be displayed as the circle with an exclamation point or as ‘BRAKE’ text. If the brake warning light stays on after the engine has started and the electronic parking brake has been released, switch off the engine and restart it.
What are the different colors of Subaru warning lights?
They are roughly ordered by importance, which tends to be by color (red, amber, yellow, orange, green, blue, gray), but there are nearly 70 of them so be patient! Models examined include Ascent, BRZ, Crosstrek, Forester, Impreza, Legacy, Outback, Tribeca, and WRZ.
How to check the oil level in a Subaru Outback?
1. Pull off the road when safe to do so and stop ideally on a level surface. 2. Wait a few minutes for the oil to drain into the oil pan. 3. Open the hood and remove the dipstick (1). Wipe the end of the dipstick clean with a cloth and replace it. 4. Remove the dipstick again and check that the oil level is between the MIN and MAX marker. 5.