What does lean Bank 1 on a Pontiac mean?

P0171 PONTIAC Fuel Trim System Lean Bank 1: Code Meaning, Causes, Symptoms, & Tech Notes P0171 PONTIAC | Fuel Trim System Lean Bank 1 | The Engine Control Module (ECM) controls the air/fuel metering system in order to provide the best possible combination of driveability, fuel economy, and

What is the OBDII code on a Pontiac Vibe?

One of the most common trouble codes with the Pontiac Vibe is the P0171 code. This code number references a number that is given to you when you plug your car into a OBDII scanner. It’s not the most complicated OBDII trouble code to diagnose. It is also one of the most common. P0171: Fuel Trim System Lean Bank 1. P0171 is an OBDII trouble code.

What causes the p0171 code on a Pontiac Vibe?

Vacuum Leaks – With the Pontiac Vibe, one of the most common cause for the P0171 code to show is a vacuum leak. Take a look around and see if you can find the vacuum leak. Here’s a great YouTube video on how to find a vacuum leak.

When is the p0171 system too lean Bank 1 detected?

If the P0171 is combined with the P0174 code, it’s very likely that the problem is caused by an intake leak. If there are no intake leaks, the next step is to replaced the air filter and clean the air flow meter. If the problem persist the front oxygen (O2) sensor may need to be replaced. When is the code detected?

How much does it cost to diagnose Pontiac p0171 code?

The cost of diagnosing the P0171 PONTIAC code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour. When is the P0171 PONTIAC code detected? – Fuel injection system does not operate properly.

What causes a p0171 fuel trim system Lean Bank 1?

If the problem persists the front oxygen (O2) sensor may need to be replaced. The P0171 code could also be caused may be caused by one or more of the following: debris on MAF sensor causing an incorrect reading, improper oil level, low or high fuel pressure or Engine Control Temperature (ECT) Sensor reading inaccurate.

What should fuel trim be in lean bank?

If the HO2S indicates a lean condition, the fuel trim values will be above 0 percent. If the HO2S indicates a rich condition, the FT values will be below 0 percent. The short term FT values change rapidly in response to the HO2S voltage signals. The long term FT makes coarse adjustments in order to maintain an air/fuel ratio of 14.7:1.

What causes a p0171 problem on a car?

P0171 is triggered by the engine bank 1 “upstream” oxygen sensor and P0174 is triggered by the engine bank 2 “upstream” oxygen sensor. The oxygen sensor alerts your system when the condition is too lean meaning there’s too much oxygen in the exhaust. The symptoms and causes will help you determine the exact issue and how to fix it.

What does code p0171-system too lean mean?

Code P0171 – System Too Lean: Symptoms, causes, common problems, diagnostic. The OBDII trouble code P0171 – System Too Lean (Bank 1) means that the engine air-fuel mixture is too lean, or there is too much air and too little fuel.

What does p0171 and po174 mean?

A continual low voltage reading indicates a lean fuel mixture, too much oxygen. The optimal ratio is 14.7:1 (air:fuel). When your powertrain/engine control module receives a reading that indicates there’s too much oxygen and the ratio is incorrect, it sends an error code P0171 or P0174.

How much does it cost to fix Pontiac p0171 code?

The cost of diagnosing the P0171 PONTIAC code is 1.0 hour of labor. The auto repair labor rates vary widely across the country, and even within the same city. Most auto repairs shops charge between $75 and $150 per hour. When is the P0171 PONTIAC code detected? – Fuel injection system does not operate properly.

Why does my car have a lean code?

If the sensing element fails, feedback information will be incorrect causing a lean mixture code. Step 7 – When an engine misfires an almost clean charge of oxygen is released into the exhaust system. This will cause the exhaust system to test lean as tested by the O2 sensors, this can sometimes be fixed by a tune up .

How to fix automotive engine lean exhaust codes?

Begin with the vehicle parked on flat ground in park with the emergency brake set. Step 1 – Once a check engine or service engine soon light has determined a lean engine code has materialized, a repair procedure inspection is needed.

What to do if your lean code is incorrect?

Using sensor safe carburetor cleaner to clean this filament can sometimes remove these deposits allowing the sensor to obtain a correct reading. Step 6 – Testing the exhaust system oxygen sensors can help determine the functionality of the sensor. If the sensing element fails, feedback information will be incorrect causing a lean mixture code.

Why is my fuel system too lean Bank 1?

According to the Manufacture, here are the possible causes for this code. The customers concern is the check engine light on with a Diagnostic trouble code stored in the computer of P0171 indicating the fuel trims are too high and the engine is running lean.

What does Bank 1 mean on a V6 engine?

Basically this means that an oxygen sensor in bank 1 has detected a lean condition (too much oxygen in the exhaust). On V6/V8/V10 engines, Bank 1 is the side of the engine that has cylinder #1. The P0171 is one of the more common trouble codes.

What does it mean when Bank 1 is too lean?

What does p0171 system too lean Bank 1 mean?

P0171 System Too Lean Bank 1 Technical Description. System Too Lean (Bank 1) What does that mean? This diagnostic trouble code (DTC) is a generic powertrain code. It is considered generic because it applies to all makes and models of vehicles (1996-newer), although specific repair steps may be slightly different depending on the model.

Navigation