What does it mean when TPMS light comes on on Hyundai?
When the light comes on it means one of the tires is low on pressure or one of the sensors in the tires has failed. Check the tire pressure, inflate all to 35 psi and drive the car, the light should then go out. If not, then one of the sensors has probably failed. Ask Your Own Hyundai Question.
What kind of TPMS system does Hyundai Santa Fe have?
An indicator light (low-line TPMS system) or each tire pressure will show on the dash (high-line TPMS system). Type of TPMS system: Direct TPMS: A TPMS relearn is recommended when replacing a sensor.
How to check tire pressure on Hyundai Santa Fe?
(If your vehicle has tires of a different size than the size indicated on the vehicle placard or tire inflation pressure label, you should determine the proper tire inflation pressure for those tires.)
What kind of TPMS system does Hyundai Elantra have?
An indicator light (low-line TPMS system) or each tire pressure will show on the dash (high-line TPMS system). Direct TPMS: A TPMS relearn is recommended when replacing a sensor.
How does the TPMS work on a Hyundai Santa Fe?
1) Condition – Ignition ON and Engine OFF. 2) Hold the TPMS module within 3 inches (76 mm) of the sensor valve, read each tire pressure sensor ID in the following order: front left, front right, rear left, then rear right. 3) Press the ENTER button as each tire is illuminated on the screen.
When the light comes on it means one of the tires is low on pressure or one of the sensors in the tires has failed. Check the tire pressure, inflate all to 35 psi and drive the car, the light should then go out. If not, then one of the sensors has probably failed. Ask Your Own Hyundai Question.
What is the tire pressure monitor on a Hyundai Santa Fe?
The tire pressure monitoring system (TPMS) on the 2010 – 2016 Hyundai Santa Fe and 2013 – 2016 Santa Fe Sport monitors the air pressure in the four road tires with wheel-mounted tire pressure sensors.
How do you reset the tire pressure light on a Hyundai?
Press the TPMS reset button and hold it until the light blinks three times, then release it. Start the car and let it run for 20 minutes to reset the sensor. You’ll usually find the tire pressure monitor reset button beneath the steering wheel. Click to see full answer. Beside this, how do you reset the TPMS on a Hyundai Santa Fe?