What does it mean when it says all wheel drive disabled?
These are All-wheel Drive (AWD) Disabled Indicator symbols. The lights, all shown in yellow/amber, flash when the AWD system is disabled temporarily and remains on when there is a malfunction in the system. The open circles indicate that the AWD system has been disconnected.
What does service wheel drive mean?
The Service All-Wheel Drive message can appear in the driver information center (DIC) when your vehicle is having an issue with the all-wheel drive (AWD) system. If the DIC displays this alert, stop your vehicle as soon as possible, turn it off, and turn it back on again.
Is it safe to drive with the AWD light on?
If any malfunction occurs in the AWD system while the engine is running, the warning light will come on. If the warning light blinks rapidly during operation, stop the vehicle with the engine idling in a safe place immediately. Then if the light turns off after a while, you can continue driving.
What does it mean when your service 4 wheel drive light comes on?
The “Service 4WD System” message indicates a problem with the 4WD system that should be properly diagnosed and repaired. When the ignition key is turned from OFF-RUN-START and is released back to the RUN position after the vehicle starts, the 4WD warning light should go on for 1 to 2 seconds and then go out.
Where do I find the service all wheel drive message?
The Service All-Wheel Drive message can appear in the driver information center (DIC) when your vehicle is having an issue with the all-wheel drive (AWD) system.
When does all wheel drive off message go off?
ALL WHEEL DRIVE OFF If your vehicle has the All-Wheel Drive (AWD) system, this message displays when the rear drive system is overheating. This message turns off when the rear drive system cools down. If the warning message stays on for a while, you need to reset the warning message.
When does the AWD warning message turn off?
If your vehicle has the All-Wheel Drive (AWD) system, this message displays when the rear drive system is overheating. This message turns off when the rear drive system cools down. If the warning message stays on for a while, you need to reset the warning message. To reset the warning message, turn the ignition off and then back on again.
What are the all wheel drive disabled and fault indicators?
All-wheel Drive Disabled and Fault Indicator Symbols These are All-wheel Drive (AWD) Disabled Indicator symbols. The lights, all shown in yellow/amber, flash when the AWD system is disabled temporarily and remains on when there is a malfunction in the system. The open circles indicate that the AWD system has been disconnected.