What does it mean when bank1 system too lean?
The OBDII trouble code P0171 – System Too Lean (Bank 1) means that the engine air-fuel mixture is too lean, or there is too much air and too little fuel. Driving a car with the code P0171 can cause more damage to the engine over time, as when the engine runs lean, the combustion temperature is higher.
What does the MAF sensor on a GMC Sierra do?
A MAF sensor measures the density of the air entering the intake manifold. It passes this information onto your Sierra’s ECU. The ECU uses this information along with other sensor data to control the amount of fuel that enters the combustion chamber. If you do determine that you need a new mass airflow sensor, they aren’t too expensive.
What are the symptoms of a bad MAF sensor?
Here are the most common symptoms of a bad or failing MAF sensor: Idle Issues – Your Sierra may run rich or lean when idling, or it may also idle erratically. A rich condition is when there is not enough air relative to the fuel in the air/fuel mixture. The exhaust color is usually darker when running rich.
What should fuel pressure be on GM 4.3L Vortec?
You can find this tutorial in Spanish here: Cómo Probar La Bomba de Combustible (GM 4.3L, 5.0L, 5.7L) (at: autotecnico-online.com ). The fuel system in your 4.3L, 5.0L, or 5.7L Vortec engine needs at least 50 PSI of fuel pressure to start.
How to check for fuel leaks in a GM 4.3L?
Once the fuel pressure gauge registers pressure, check for fuel leaks around the Schrader valve. It’s very important that NO fuel leaks are present for the accuracy of the test. Once you have verified no fuel leaks, continue to the next step. Have your assistant crank the engine as you eyeball the fuel pressure gauge.
A MAF sensor measures the density of the air entering the intake manifold. It passes this information onto your Sierra’s ECU. The ECU uses this information along with other sensor data to control the amount of fuel that enters the combustion chamber. If you do determine that you need a new mass airflow sensor, they aren’t too expensive.
What are the symptoms of a bad manifold absolute pressure sensor?
Common signs of manifold absolute pressure sensor problems include excessive fuel consumption, lack of power, and failing an emissions test. 1. Excessive fuel consumption 2. Lack of power
What should the fuel pressure be on a GMC Sierra?
Drives:2004 GMC Sierra Posted October 8, 2010 When the ignition switch is ON and the fuel pump is running, the fuel pressure indicated by the fuel pressure gauge should read 379-427 kPa (55-62 ps i). The spring pressure inside the fuel pressure regulator controls the fuel pressure.
What should the pressure be on a MAP sensor?
At 20 “Hg, the MAP sensor will indicate about 5 psi. This is because the MAP sensor measures “absolute” pressure, based on a perfect vacuum, rather than atmospheric pressure. A failed MAP sensor has serious implications on fuel control, vehicle tailpipe emissions and fuel economy.