What does F32 mean on Whirlpool washer?
The Whirlpool Duet Washer F32 Error is a water level pressure switch failure code. If there is no voltage to the pressure switch from the central control unit or if the contacts in the pressure switch are worn out the central control will report this error and shut the cycle down.
How do I fix error code F33?
This is most commonly caused by a failed drain pump. Check the drain pump trap and make sure it is clean and that nothing is binding the pump impeller. Check the wiring at the drain pump make sure the connection is seated properly. If all that looks and the error continues replace the drain pump.
What does F5 E3 mean on a Whirlpool washer?
The F5 E3 alert indicates there is issue with the lid lock. Remove any objects from the lid and clear any obstructions. Touch POWER to exit cycle, then touch POWER again to release lid. If this is unsuccessful, reboot the machine by unplugging the washer and wait two minutes before plugging the machine back in.
How do you fix the F code on a Whirlpool Cabrio washer?
Unplug the washing machine for 2 minutes and then plug it back (it will help the appliance re-conduct self-diagnostics and conclude that there is no breakdown); Press the START and PAUSE buttons simultaneously and hold them for 1 minute to clear the error code.
What does Dr code mean on Whirlpool Cabrio washer?
If the Whirlpool washer stops during a process and the dr code shows up on an electronic table, there is a problem with water drainage. If the Whirlpool washing machine cannot drain water from its tank for various reasons, it displays the dr error.
What is an F 33?
Type 1 Excludes.
Should a washing machine drain pump spin freely?
It should move freely. However, some impellers may feel like there’s a small resistance which when overcome allows the impeller to jump 180 degrees round. Then another small resistance needs overcoming before it jumps round again.
What does F5 mean on Whirlpool?
The F5 on most Whirlpool ranges will indicate that you have a problem with the oven door latch assembly or the oven door switch. Since you are seeing this error code when you are trying to set the self cleaning mode, this is likely the problem with your range. You could have a problem with the door switch.
How do you unlock a whirlpool E3 F5 washer?
F5 E3 Error Code
- Power unit down by turning off the circuit breaker or unplugging for one (1) minute.
- Power unit up by reconnecting power.
- Restart a new cycle.
- Monitor the washer for one (1) minute to ensure the error code does not display again.