What does a WOT switch do?
A wide open throttle switch can stop accidental activation of your nitrous system which could potentially save your motor. This WOT switch will work with any brand nitrous system and can be outfitted to work with any vehicle.
How does a nitrous WOT switch work?
The WOT switch is nothing more than a mechanical switch that gets pressed to activate the nitrous oxide when you push the gas pedal completely down. Think of it like putting the red activation button underneath the gas pedal. You push the pedal down hard enough and it presses the button.
Is World of tanks coming to Nintendo switch?
The action-packed, free-to-play tank shooter has come to the Nintendo Switch™ system! Become part of the community of 137 million players from all over the world. World of Tanks Blitz is an action game dedicated to 7-vs-7 tank combat that you can play by yourself or with your friends.
Do you need a window switch for nitrous?
No, if the system is armed, the WOT switch allows you to spray whenever the throttle is open 100% regardless of RPM. That’s why you need the window switch.
Which is the correct definition of wide open throttle?
Wide open throttle or wide-open throttle (WOT), also called full throttle, is the fully opened state of a throttle on an engine ( internal combustion engine or steam engine ). The term also, by extension, usually refers to the maximum-speed state of running the engine, as the normal result of a fully opened throttle plate/ butterfly valve.
How do you check wide open throttle switch?
Check the switch for engagement at wide open. There should be an audible click or use a volt/ohm meter to confirm activation. If the switch doesn’t activate, loosen the bracket and switch screws to realign if necessary. Also check the secondary bracket for alignment.
What should the resistance of the throttle be?
This will verify the TPS is smoothly adjusting its output value. Pin C (black wire) to pin E (red wire) should be about 9,000 ohms. Pin C (black wire) to pin D (white wire) should be 1,000 ohms. If you slowly open the throttle, this resistance should climb to about 9,000 ohms.
What does the idle switch tell the PCM?
The idle switch’s job is to tell the PCM when the throttle plate is in its ‘closed throttle’ position and when it’s in its ‘wide open’ throttle position. How? By closing one set of circuits while another set is open inside the idle switch.
What is the wide open throttle switch called?
The throttle position sensor (TPS) is called the Wide Open Throttle Switch or the Throttle Valve Switch by the Isuzu service literature and in this tutorial, I’ll show you how to test it. Contents of this tutorial: Symptoms Of Bad Throttle Valve Switch.
What is the throttle position sensor ( TPS ) called?
The throttle position sensor (TPS) is called the Wide Open Throttle Switch or the Throttle Valve Switch by the Isuzu service literature and in this tutorial, I’ll show you how to test it. Contents of this tutorial: Symptoms Of Bad Throttle Valve Switch. TEST 1: Making Sure The WOT Switch Is Getting Power.
The idle switch’s job is to tell the PCM when the throttle plate is in its ‘closed throttle’ position and when it’s in its ‘wide open’ throttle position. How? By closing one set of circuits while another set is open inside the idle switch.
What is the code for the throttle switch?
Depending on the type of failure of the throttle valve switch, you’ll see: Trouble Code 21: Throttle Valve Switch (Idle and WOT). Trouble Code 43: Throttle Valve Switch (Idle Position). Trouble Code 65: Throttle Valve Switch (Full Throttle).