What does a thermistor do in an air conditioner?
An AC thermistor is a type of temperature sensor that is commonly found on modern AC systems. They detect temperatures and send a resistance signal to the AC control module so that the automatic adjustments can be made to keep the cabin at the correct temperature.
How do you replace an evaporator temperature sensor?
Once you’ve removed the old sensor, the replacement steps are in direct opposite order. The first step in the installation process will be to reattach the electrical harness to the new sensor. Step 10: Reinstall the EVAP temperature sensor. Screw the new sensor into the AC condenser, turning it to the right.
Where is the thermostat sensor on my air conditioner?
The thermostat sensor is located near the evaporator coils. These coils are inside your air conditioner unit. As the air is sucked through the return vents, the air passes by the sensor and the coils. As the air passes the sensor, it reads the temperature and compares…
How is the temperature of an evaporator controlled?
The operation of this luxury feature is controlled by a very small sensor called the evaporator temperature sensor or EVAP temperature switch.
What does the code p-0535 mean on an evaporator sensor?
The OBD-II code (P-0535) indicates that an Evaporator Temperature Sensor failure has occurred. Beyond completing an OBD-II scan, a bad or failing evaporator temperature switch will produce a few symptoms that can alert the driver of a potential issue that should be serviced.
Once you’ve removed the old sensor, the replacement steps are in direct opposite order. The first step in the installation process will be to reattach the electrical harness to the new sensor. Step 10: Reinstall the EVAP temperature sensor. Screw the new sensor into the AC condenser, turning it to the right.
Why is my a / C EVAP temp sensor not working?
The compressor wont kick on. The low pressure line had like 160psi in it (crazy high) and I found a code for the Evap Temp Sensor voltage high It resents instantly after its cleared. The voltage it was showing according to my Modis was 5.0V.
The operation of this luxury feature is controlled by a very small sensor called the evaporator temperature sensor or EVAP temperature switch.
What should temp be on AC evaporator vent?
If the gauge goes over your running 35 psi when you open the blue valve/left/low side on the gauge set it very well should take the freon. Turn the can upside down, it will help it go in faster because its liquid. Depending on the temp outside 35 psi is not bad, neither is 37 deg at the vent.