What do I need to replace my serpentine belt?
I just got my serpentine belt replaced and it’s squealing when I start the car and sometimes when I hit the gas what is this do I need a fan belt?? My car has 134000 miles.
How many miles can a serpentine belt last?
As a general rule, a serpentine belt lasts up to 50,000 miles or five years before it need to be replaced. Some can even last for up to 80,000 miles without any problems, but consult the owner’s manual for exact service interval.
Why is my serpentine drive belt not working?
This could be due to a slippage or misalignment. The only way to make the noise go away is to contact a professional mechanic and have them replace the serpentine/drive belt or diagnose the issue. 2. Power steering and AC not working
Why does my serpentine belt make a squealing noise?
My car has 134000 miles. Noise of that type is due to a failed or failing bearing in one of the pulleys or accessories (e.g., alternator, water pump, A/C compressor) that is driven by the serpentine belt, the belt is not properly tensioned, or the rotating pulleys driven by the belt are not all in the same plane.
Why do serpentine belts have to be replaced?
Thanks to improvements in rubber technology, serpentine belts last much longer than they did back in the day. Most serpentine belts generally last between 50,000 and 100,000 miles. Eventually, your car’s serpentine belt will wear down from continuous exposure to heat and friction and will need to be replaced.
What is the cost of a serpentine belt replacement?
The costs of replacing a serpentine belt greatly depends on the make/model of the car you drive, the mechanic you hire and where you live. For just the parts, most serpentine belts retail for $15 to $45, but if you needed to hire a mechanic to replace it, then the costs could increase…
What is the average life span of a serpentine belt?
The lifespan of the serpentine belt will depend mostly on the type of material it’s made of. Older style belts generally last about 50,000 miles, while those made from EPDM can last up to 100,000 miles.
How do I put on serpentine belt?
Snap a long-handled ratchet or a serpentine belt tool into the square 1/2-in.-drive or 3/8-in.-drive opening. Or use a socket on the hex-shaped protruding nut. Slowly rotate the tensioner arm as far as it will turn. Then release the tension.
Why is my alternator belt still squealing after replacing?
For instance, the alternator works optimally with the serpentine belt connecting it to the engine pulley, enabling the alternator to turn together with other belt-driven components in your car. Belt or pulley misalignment is a common issue that causes changed serpentine belt still squealing.
Can a belt be removed from a car alternator?
The alternator actually pivots around the lower bolt, so you can remove the belt. The other bolt will be in a slot not a round hole, and the position of the bolt in the slot adjusts the belt tension. You didn’t tension the belt enough when you refitted the alternator.
When should you replace the serpentine belt?
Most serpentine belts need to be replaced every 40,000 to 70,000 miles. If there are signs of the belt rubbing on something, make sure to identify and repair whatever it was rubbing on to avoid damaging the new belt.
What are the symptoms of a bad serpentine belt?
Symptoms of a Bad or Failing Serpentine/ Drive Belt . Common signs include a squealing noise from the front of the vehicle, power steering and AC not working, engine overheating, and cracks on the belt.
Why is my alternator squealing?
Alternators don’t squeal. They can hum, but a squeal is caused by a slipping belt. A “hum” can be caused by a bad alternator bearing or burnt diodes.
Why are my serpentine belts squealing after replacing?
Just replaced both serpentine belts in my car, was not running into any kind of squealing before, but had not replaced the belts yet and the car was up to 90k miles. After replacing the belts, they started squealing.
What is the serpentine belt on a car called?
Most cars and trucks today have what is called a serpentine belt which runs most accessories.They are very dependable and usually easy to replace. To decide if your belt needs replacing, simply look at the grooved side of the belt to see if it is cracking badly.
Is the alternator part of the 3 belt system?
Yes, this model actually uses 3 belts if it is A/C equipped. Alternator, power steering and AC belt are all separate. I attached a copy of a page from the service manual that shows how to install the belts. If you need more info let us know so we can provide you with more assistance. Good Luck Was this answer helpful?
What happens when the serpentine belt fails on an alternator?
The serpentine belt powers the alternator, and if it fails, the alternator will stop working the moment your belt wears out and breaks, or the pulley becomes damaged. This can also happen if the serpentine belt is not tightened correctly. Most cars have automatic tensioners, but these can fail, so it is better to double-check.
What does the serpentine belt on a Toyota do?
Toyota or Lexus with a V6 engine. The serpentine belts are responsible for driving accessories off of the crank of the engine. In the Toyota V6 engines, they drive the alternator and A/C compressor on one belt, and the power steering pump on the secondary belt.
What’s the difference between an alternator and a power steering belt?
The alternator belt uses a pinch bolt and a long tension bolt, in addition to its pivot bolt. The power steering bolt has a tension bolt and a pinch bolt that slides on a track. Tensioning the power steering belt can be difficult since the position of the pump, determined by the position if your pry bar, determines the tension.
When to replace power steering belt in Toyota?
In the Toyota V6 engines, they drive the alternator and A/C compressor on one belt, and the power steering pump on the secondary belt. Replacing the belts is a good idea if they are worn, cracked or are squealing on cold starts. Belt failure can lead to sudden loss of steering, a discharged battery or an ineffective A/C system.
What’s the best way to remove a seatbelt?
In addition, if there are any objects stuck within the belt loop or the bottom portion of the belt loop, remove them with either your fingers or by using needle nose pliers. Allow the seatbelt to roll back into place. Test the belt to make sure it releases and locks into place normally.
What to do if your Mitsubishi Lancer won’t start?
Also, the safety interlock on brake pedal, it won’t start if that is faulty, or same on clutch if manual. Maybe try running a jumper cable from battery Pos+ to starter with key on..but be safe about it in case it does start, don’t want you run over by a lurching car–it happens. 23 people found this helpful.
What to do if your seat belt does not snap back in place?
If the seatbelt is buckled in, simply unlatch it from the cartridge and gently pull it away from the seat to release more of the belt. Then let it gradually go back into form behind the seat. If it does not snap back into place, the belt may be tangled, twisted or there may be a jam deep within the mechanism.
Where can I get a seat belt clip for a Mitsubishi Lancer?
Consider obtaining a spare seat belt buckle for a Mitsubishi Lancer from a junkyard that you can cut from the belt and keep buckled into the clip when necessary. It is well-established that passengers are much safer when wearing seat belts.
What kind of safety system does Mitsubishi Lancer have?
The Lancer is a sedan, manufactured by Mitsubishi, that has been produced on and off since 2006. The Lancer features a computerized safety system to prevent accident or injury, including a seat belt alarm that reminds both driver and passenger to put on their seat belts.
How do you remove a serpentine belt from a car?
Pull the belt off of the pulleys. With the tension relieved from the belt, pull it off of the pulley that has been placing tension on it, then remove it from the around the rest of the pulleys on the engine. If the belt is severely damaged, be sure to remove any parts that may have come off of it as well.
What is the seat belt alarm on a Lancer?
The Lancer features a computerized safety system to prevent accident or injury, including a seat belt alarm that reminds both driver and passenger to put on their seat belts. This alarm is activated when the system senses a certain amount of weight on the given seat.
Why does my serpentine belt make a whining noise?
This may be related to a variety of things that are driven by the serpentine belt that may correlate to the acceleration, however the most common noises resembling a whining sound are a failing alternator or a power steering pump… Hey there.
How much does it cost to replace a serpentine belt?
For just the parts, most serpentine belts retail for $15 to $45, but if you needed to hire a mechanic to replace it, then the costs could increase to anywhere from the shop minimum, often around $75 to as much as $200 if the part is difficult to access and/or install for both the parts and the professional install.
When should a drive belt be replaced in your car?
A drive belt is made of long-lasting rubber-based material. In most cars, a drive belt is replaced between 40,000 and 70,000 miles, however, we have seen cases where the drive belt lasted over 100k miles. What makes the belt wear sooner? Water, road dirt, excessive heat and oil leaks can cause the belt to deteriorate prematurely.