What causes the p0011 code on a Nissan?

Tech notes Since the Intake valve timing control solenoid valve uses oil flow to control timing, dirty oil can cause the valve to stuck open or close. When there is a gap between angle of target and phase-control angle degree, the valve will stop working and the ECM will trigger the P0011 code.

What are the symptoms of a p0011 DTC?

Potential Symptoms. Most likely a P0011 DTC will result in one of the following: hard starting, poor idle, and/or stalling. There are potentially other symptoms as well. Of course, when trouble codes are set, the MIL (malfunction indicator lamp, a.k.a. the check engine light) illuminates.

When does the ECM trigger the p0011 code?

When there is a gap between angle of target and phase-control angle degree, the valve will stop working and the ECM will trigger the P0011 code. This mechanism hydraulically controls cam phases continuously with the fixed operating angle of the intake valve.

What do you need to know about error code p0012?

For error code P0012, one or more of the below repairs may be needed to solve the underlying issue. For each possible repair, the estimated cost of repair includes the cost of the relevant parts and the cost of labor required to make the repair.

What does trouble code p0011 mean on a car?

The camshaft (s) is (are) adjusted by the ECM through the use of an oil control valve (s) (OCV) also called variable valve timing control solenoid valves. When trouble code P0011 is set, it means that the intake camshaft in Bank 1 is more advanced than the ECM has told it to be.

What do the p0012 and p0022 codes mean?

For the P0012 and P0022 codes to appear indicates that the OCV solenoid is mechanically closed at all times and not allowing engine oil to move the intake camshaft (s) when commanded (ground applied) by the PCM.

Why is my Ford Edge p0012 not working?

Wiring Issues – The wiring going from the solenoid to the ECM can become damaged or broken. This will throw the P0012 OBDII code. The wiring harness to the intake camshaft position sensor may also develop a poor connection. YouTube: How to Find an Open or Short the Fast Easy Way.

How much does it cost to repair a p0011 Hyundai?

Labor: 1.0 The cost of diagnosing the P0011 HYUNDAI code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour. P0011 HYUNDAI Possible Symptoms Engine Light ON (or Service Engine Soon Warning Light)

What’s the error code on my Nissan Note?

The first time, the engine lost almost all power, and the auto start/stop dashboad light started flashing. Turning the engine on/off removed the flashing, but then the EML came on constant. I read the codes with a cheap bluetooth ELM clone, error code P0011.

What is the OBD2 code for a Nissan?

OBD2 Code P0011 Nissan definition: A code P0011 Nissan definition:the VVT (variable valve timing) or VCT (variable camshaft timing) components and the car’s PCM (powertrain control module, also called an ECM). That consists of a few different components but the P0011 Nissan DTC specifically definition:the camshaft (cam) timing.

How much does it cost to repair a Nissan p0011 code?

Please try again later. The cost of diagnosing the P0011 NISSAN code is 1.0 hour of labor. The auto repair’s diagnosis time and labor rates vary by location, vehicle’s make and model, and even your engine type. Most auto repair shops charge between $75 and $150 per hour.

What is the cam timing on a Nissan p0011?

That consists of a few different components but the P0011 Nissan DTC specifically definition:the camshaft (cam) timing. In this case, if the cam timing is above a set limit (over-advanced), the engine light will be illluminated and the code will be set. The “A” camshaft is either the intake, left, or front camshaft.

What are the symptoms of a Nissan p0011 DTC?

Most likely a P0011 Nissan DTC will result in one of the following: hard starting, poor idle, and/or stalling. There are potentially other symptoms as well. Of course, when trouble codes are set, the MIL (malfunction indicator lamp, a.k.a. the check engine light) illuminates.

When there is a gap between angle of target and phase-control angle degree, the valve will stop working and the ECM will trigger the P0011 code. P0011 NISSAN Possible Symptoms Engine Light ON (or Service Engine Soon Warning Light) Possible engine lack/loss of power Posssible engine rough idle P0011 Nissan Description

Why is my intake valve stuck open on my Nissan?

P0011 NISSAN Tech Notes Since the Intake valve timing control solenoid valve uses oil flow to control timing, dirty oil can cause the valve to stuck open or close. Before replacing the valve, change engine oil and filter and reset engine code. What does this mean? Cost of diagnosing the P0011 NISSAN code Labor: 1.0

What is the OBDII code for an intake valve?

OBDII Code List P0011 NISSAN P0011 NISSAN – Intake Valve Timing Control Performance Bank 1 Repair Importance Level: 3/3 Repair Difficulty Level: 3/3 Comments | Add Comment P0011 NISSAN Possible Causes Low or Dirty Engine Oil Faulty Intake Valve Timing Control Solenoid Valve

What does trouble code p0011 mean on an ECM?

What does the OBDII code for Nissan Altima mean?

P0011 is a generic OBDII code. This means that it has the same definition for the Nissan Altima as it does on any other vehicle. VVT changes the frequency and distribution of gases entering and exiting the combustion chamber. It allows the engine to act as though it has different camshaft profiles…

What is the OBDII code for the Nissan Frontier?

The list of VVT vehicles is growing, and the Nissan Frontier can have VVT, and is prone to developing this code. P0011 is a generic OBDII code. This means that it has the same definition for the Nissan Frontier as it does on any other vehicle. VVT changes the frequency and distribution of gases entering and exiting the combustion chamber.

What does p0021 stand for in Nissan Frontier?

Code: P0021 = Intake Valve Timing Control Solenoid Failure, Bank 2 (Drivers side of engine) Symptoms: Rough idle (below 1000rpm particularly), truck runs like rubbish, SES light (Service Engine Soon). Problem: The solenoid that controls the valve timing has failed or is running intermittently and is fixing to fail.

Where is the p0011 solenoid on Nissan Frontier?

*Note that this applies to a 2nd gen V6 (VQ40DE). *Also keep in mind there is another IVTCS solenoid on the passenger side of the engine. If you have code P0011 this applies to you too but just on the opposite side.

What does the code p0011 mean on a car?

What Does the Code P0011 Mean? This is a generic trouble code, meaning it can appear on any vehicle equipped with an OBD-II system. However, it is related to the variable valve timing or variable camshaft timing components. Therefore, it can only appear in cars equipped with these systems.

What does p0011 code mean on oil life reset?

Press the “INFORMATION” button to scroll through until “OIL LIFE RESET” is displayed. Press and hold “RESET” button until “ACKNOWLEDGED” is displayed. Turn the ignition off. and had P0011 code we replaced cam shaft sensor it went away for a day and engine light came back again. Any suggestions please?

What does DTC code p0011 ” a ” stand for?

Wiring problems (harness/wiring) in intake timing control valve control solenoid system Continuous oil flow to VCT piston chamber Failed timing valve control solenoid (stuck open) This DTC code is a result of a mechanical fault of the VCT unit or related components, so there is no need for electrical diagnosis.

How much does it cost to repair Nissan p0011 engine code?

The cost to diagnose the P0011 NISSAN code is 1.0 hour of labor. The auto repair’s diagnosis time and labor rates vary by location, vehicle’s make and model, and even your engine type. Most auto repair shops charge between $75 and $150 per hour.

What does the p0021 Nissan engine code mean?

Since the Intake valve timing control solenoid valve uses oil flow to control timing, dirty oil can cause the valve to stuck open or close. Before replacing the valve, change engine oil and filter and reset engine code. What does this mean? The cost of diagnosing the P0021 NISSAN code is 1.0 hour of labor.

How to fix p0011 Nissan intake valve timing bank?

How do I fix code P0011 NISSAN Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins. P0011 NISSAN Tech Notes

How much does it cost to diagnose a Nissan code?

Labor: 1.0 The cost of diagnosing the P0011 NISSAN code is 1.0 hour of labor. The auto repair labor rates vary widely across the country, and even within the same city. Most auto repairs shops charge between $75 and $150 per hour. When is the P0011 NISSAN code detected?

What is the OBD2 code for a Nissan OBDII?

OBDII Nissan Code Definitions. Be sure to double check the codes. Anything P1000 to P1999 or P3000 to P3400 will be Manufacturer specific and may not match the ones listed here. Check specific manufacturer pages on the site, as some of them, we list the OBD2 codes on those pages for those specific vehicles.

Why does my Nissan Maxima have a rough idle?

While there are a variety of reasons your Nissan Maxima has a rough idle, the most common 3 are a vacuum leak, an issue with the spark plugs, or a problem with the ignition coil.

How to find the Nissan OBDII trouble code?

A particular trouble code can be identified by the number of four-digit numeral flashes. The ‘zero’ is indicated by the number of ten flashes. The length of time the 1,000th-digit numeral flashes on and off is 1.2 seconds consisting of an ON (0.6-second) – OFF (0.6-second) cycle.

How long to clean Nissan intake valve solenoid?

If the code comes back you can remove the Intake valve timing control solenoid and clean it with brake cleaner. The cost to diagnose the P0011 NISSAN code is 1.0 hour of labor.

What is the p0011 code on a Chevy Equinox?

P0011 is a common issue among the following makes: Chevrolet (especially on the Chevy Equinox and Malibu), Nissan, Subaru, Hyundai, and GMC. What is Variable Valve Timing?

What does p0011 stand for in VVT?

The way VVT works is that the ECM/PCM closely monitors the cam/crank timing and uses an oil control solenoid to manipulate the relationship between the cam gear (s) and the camshaft (s) according to predetermined algorithms. Again, the P0011 DTC stands for “A” Camshaft Position Timing Over Advanced or System Performance Bank 1.

Why does my Nissan Altima have a trouble code?

If your Altima has the P0011 trouble code it will typically not pass the State emissions tests. The Nissan Altima utilizes camshaft actuators to change the valve lift depending on the RPM of the motor. This allows for a more efficient cam profile at any speed.

What does engine code p0011 mean?

A P0011 code refers to the VVT (variable valve timing) or VCT (variable camshaft timing) components and the car’s PCM (powertrain control module) or ECM (engine control module). VVT is a technology used in the engine to allow it to get greater power or efficiency at different running points.

What does diagnostic trouble code p0011 mean?

P0011 is a diagnostic trouble code (DTC) for “Camshaft Position A – Timing Over-Advanced or System Performance (Bank 1)”. This can happen for multiple reasons and a mechanic needs to diagnose the specific cause for this code to be triggered in your situation.

What is a code po420 on Nissan Altima?

The P0420 code in a Nissan Altima will often be thrown one of your oxygen sensors are not functioning properly. Typically, the code will be triggered by the upstream oxygen sensor (before the converter). There aren’t usually any drivability issues associated with P0420.

What is this code p0011?

or valve issues of the camshaft oil control valve for the bank 1 intake camshaft.
Check the engine for it to be full of clean engine oil with the correct viscosity.
The technician will scan and document the codes received and view the freeze frame data to see when the code was set.

Cost of diagnosing the P0011 NISSAN code Labor: 1.0 The cost of diagnosing the P0011 NISSAN code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour. When is the P0011 NISSAN code detected?

How does the p0021 code work on an intake valve?

When there is a gap between angle of target and phase-control angle degree, the valve will stop working and the ECM will trigger the P0021 code. This mechanism hydraulically controls cam phases continuously with the fixed operating angle of the intake valve.

Cost of diagnosing the P0011 NISSAN code Labor: 1.0 The cost of diagnosing the P0011 NISSAN code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour. When is the P0011 NISSAN code detected?

How much does it cost to diagnose Nissan code p0011?

The cost of diagnosing the P0011 NISSAN code is 1.0 hour of labor. The auto repair labor rates vary widely across the country, and even within the same city. Most auto repairs shops charge between $75 and $150 per hour. When is the P0011 NISSAN code detected?

Why is my engine code stuck on p0021 Nissan?

P0021 NISSAN Tech Notes Since the Intake Valve Timing Control Solenoid Valve uses oil flow to control timing, dirty oil can cause the valve to be stuck open or close. Before replacing the valve, change engine oil and filter and reset engine code. What does this mean? Cost of diagnosing the P0021 NISSAN code Labor: 1.0

When does the ECM trigger the p0021 code?

When there is a gap between angle of target and phase-control angle degree, the valve will stop working and the ECM will trigger the P0021 code. P0021 NISSAN Possible Symptoms Engine Light ON (or Service Engine Soon Warning Light) Lack/Loss of power Engine rough idle P0021 Nissan Description

What does p0011 mean on a cel scan?

For those who are unfortunate enough to experience the dreaded P0011 code (including me), knows how it feels when your CEL starts blinking and you plug in your scan tool and it reads back “Camshaft Position ‘A’ Timing Over-Advanced or System Performance Bank 1”.

Is Nissan discontinuing Altima?

The Nissan Altima Coupe was discontinued due to slow sales after the 2013 model year, which means Nissan will only focus on the sedan model for the Altima while the hybrid and coupe are discontinued. [39]

What is the OBD code for a Nissan Altima?

Nissan Altima P0011: OBDII Code Diagnosis. P0011 is a very common trouble code. It affects vehicles with variable valve timing (VVT). The list of VVT vehicles is growing, and the Nissan Altima can have VVT, and is prone to developing this code. P0011 is a generic OBDII code.

Code: P0021 = Intake Valve Timing Control Solenoid Failure, Bank 2 (Drivers side of engine) Symptoms: Rough idle (below 1000rpm particularly), truck runs like rubbish, SES light (Service Engine Soon). Problem: The solenoid that controls the valve timing has failed or is running intermittently and is fixing to fail.

What causes a Nissan Altima to idle low?

When the timing is too far advanced, it can really cause some issues with the motor. Here are some of the typical symptoms of P0011 in the Nissan Altima: Poor Idle Quality – If the camshaft actuator fails while giving the engine aggressive valve timing, it’ll idle roughly.

If your Altima has the P0011 trouble code it will typically not pass the State emissions tests. The Nissan Altima utilizes camshaft actuators to change the valve lift depending on the RPM of the motor. This allows for a more efficient cam profile at any speed.

When the timing is too far advanced, it can really cause some issues with the motor. Here are some of the typical symptoms of P0011 in the Nissan Altima: Poor Idle Quality – If the camshaft actuator fails while giving the engine aggressive valve timing, it’ll idle roughly.

P0011 is a generic OBDII code. This means that it has the same definition for the Nissan Altima as it does on any other vehicle. VVT changes the frequency and distribution of gases entering and exiting the combustion chamber. It allows the engine to act as though it has different camshaft profiles…

What are the symptoms of Nissan Altima p0011?

Here are some of the typical symptoms of P0011 in the Nissan Altima: Poor Idle Quality – If the camshaft actuator fails while giving the engine aggressive valve timing, it’ll idle roughly.

What is the OBD code for a Nissan check engine light?

Refer to our Generic OBD II code listfor definitions on all other Nissan diagnostic trouble codes. Manufacturer Specific Codes P1105MAP/BARO Pressure Switch Solenoid Valve P1110Intake Valve Timing Control Solenoid

How long does it take to diagnose Nissan p0011 code?

An error occurred while retrieving sharing information. Please try again later. The cost of diagnosing the P0011 NISSAN code is 1.0 hour of labor. The auto repair’s diagnosis time and labor rates vary by location, vehicle’s make and model, and even your engine type.

What to do if your check engine light says p0011?

Check to see if there are any other codes along with P0011 and clear your Check Engine Light with FIXD. Check the engine oil level and condition. If it’s low, adjust to spec and test drive to see if the concern is resolved. If it’s dirty, change the oil and filter and test drive to see if the concern is resolved.

What does p0031 mean on a Nissan Leaf?

P0031 NISSAN Meaning Oxygen Sensors (O2S) or Heated Oxygen Sensors (HO2S) need to reach a minimum operating temperature of 750 degrees F to produce an accurate voltage signal. The faster the heated oxygen sensor reaches that temperature the faster the sensor will start sending an accurate signal to the Engine Control Module (ECM).

How does the ECM work on a Nissan?

The ECM controls the heater element circuit by allowing current flow to ground. The ECM monitors the voltage signal received through the heater element circuit and determines the state of the circuit by comparing the voltage detected with the factory specifications. Need more information on how to fix the P0031 NISSAN code?

What are the symptoms of a Nissan Murano p0011?

When the timing is too far advanced, it can really cause some issues with the motor. Here are some of the typical symptoms of P0011 in the Nissan Murano: Poor Idle Quality – If the camshaft actuator fails while giving the engine aggressive valve timing, it’ll idle roughly.

Why does my Nissan Murano have a trouble code?

If your Murano has the P0011 trouble code it will typically not pass the State emissions tests. The Nissan Murano utilizes camshaft actuators to change the valve lift depending on the RPM of the motor. This allows for a more efficient cam profile at any speed.

What does Bank 2 mean on a Nissan Murano?

P0021 is a generic OBDII code. This means that it has the same definition regardless of the make or model of the vehicle. It has the same definition for the Nissan Murano as it does on any other vehicle. Bank 2 refers to the issue being on the side of the engine with cylinder 2 in the firing order.

What does p0011 mean on a Nissan Murano?

P0011 is a generic OBDII code. This means that it has the same definition for the Nissan Murano as it does on any other vehicle. VVT changes the frequency and distribution of gases entering and exiting the combustion chamber.

What is the OBDII code for a Nissan Murano?

P0011 is a very common trouble code. It affects vehicles with variable valve timing (VVT). The list of VVT vehicles is growing, and the Nissan Murano can have VVT, and is prone to developing this code. P0011 is a generic OBDII code. This means that it has the same definition for the Nissan Murano as it does on any other vehicle.

Navigation