What causes a constant on condition on a Speedo?
You can search for codes in your speedo head. The wrong bulb will cause a constant on condition as well. I bought a used soft tail springer that the previous owner had put an AutoZone bulb in one of the rear turn signals. The correct H-D bulb with the correct resistance fixed the issue cheaper than a module.
Why does my bike turn signal not flash?
If the bike is not moving the right turn signal functions correctly. If bike is moving, if you press the right turn signal, it will light up, but not flash. Looked in the service manual and this problem is not listed for troubleshooting the turn signals. Any suggestions? Hi, Mike. Would try the signal function without the Badlands module.
Why is my turn signal not flashing on my Fatboy?
Had the same problem on a 99 Fatboy changed the ignition switch and problem was solved Have a 97 FXDWG. Installed a badlander load equalizer 17 years ago for run and brake lights on the rear. If the bike is not moving the right turn signal functions correctly.
You can search for codes in your speedo head. The wrong bulb will cause a constant on condition as well. I bought a used soft tail springer that the previous owner had put an AutoZone bulb in one of the rear turn signals. The correct H-D bulb with the correct resistance fixed the issue cheaper than a module.
Is there a problem with my speedometer on my Harley?
& filed under Harley Tips. First let me say, thank God for you guys. It’s great to have an alternative to being bent over by the “Stealership” wrench jockeys that are more into selling parts than anything else.
Can a brake light be a turn signal switch?
Since the brake lights go through the turn signal switch, could be turn signal switch also. Simple troubleshooting will let you know. news: [email protected]… > thing first and replaced the bulbs.
If the bike is not moving the right turn signal functions correctly. If bike is moving, if you press the right turn signal, it will light up, but not flash. Looked in the service manual and this problem is not listed for troubleshooting the turn signals. Any suggestions? Hi, Mike. Would try the signal function without the Badlands module.
Why are the turn signals on my hog not flashing?
Find the orange wire that feeds 12 volts to your turn signal module. Power it off of a breaker that is powered on, both 1 & 2 “clicks”. My speedometer is working erratic. When I give it throttle the speedimeter digital reading goes blank and the engine light comes on and the turn signals will not flash. When I come to a stop they work
Why is my turn signal not working on my Harley?
You may have a bad module or corroded/bad connections at the module or at the handlebar switch harness/ plug. If you determine that you need a turn signal module, we suggest Badlands. I have 2005 Road king Classic, the alarm light is coming while riding and the fob is not being touched to arm or disarm the alarm.
What to do when your speedometer does not work?
Check the grounds for the dash panel. Also, unplug, clean and replug the various plugs leading from the dash panel to the rest of the car. If you notice any that seem sloppy (loose), have burned places, or are heavily corroded, replace them. Was this answer helpful? I have this problem in a 1994 Prelude (94 and up have the EL lighted gauges).
Is it illegal to not have a turn signal on a bike?
It’s not a showstopper because you can still ride. But turn signals are an essential part of bike safety. Hand signals are fine during the day, yet are hard to see at night. A broken signal light is illegal in many states. So, don’t let this problem persist. Get those signals fixed as soon as you can.
What to do when your turn signal doesn’t work?
Turn the ignition to run/stop in run position with ignition off. Hold ODO reset button in and hold. Turn ignition switch to IGN. Release ODO reset button. Background should light up, speedometer needle should sweep its full range and indicator lamps (battery, security, low fuel, check engine and cruise) should all light up.
Why are my turn signals not flashing on my Harley Davidson?
If you are stuck with having to manually cancel the turn signals, the problem could be found in connectivity to the speedometer or the TSSM. Check the switches. Check for loose or disconnected wires to the speedometer. Check the tip switch that cancels if the bike falls over.