What are the causes of a p0748 transmission code?
Causes for this P0748 transmission code may include: 1 Defective Pressure Control Solenoid 2 Dirty or contaminated fluid 3 Dirty or clogged transmission filter 4 Defective Transmission Pump 5 Defective Transmission Valve Body 6 Restricted hydraulic passages 7 Corroded or damaged connector 8 Faulty or damaged wiring 9 Faulty PCM
What is the diagnostic trouble code ( DTC ) p0717?
The Diagnostic Trouble Code (DTC) P0717 is detected when TCM or ECM receives no signal from the sensor. Need more information on how to fix the P0717 code?
What does p0717 input turbine speed sensor circuit no signal trouble code?
If you have a P0717 Input Turbine Speed Sensor Circuit No Signal trouble code, this post will help you understand what it is and how to fix it. The computer wants to know if the transmission is working properly. So it reads the speed of the input shaft and compares it to the speed of the output shaft.
When to set the p0717 check engine light?
The PCM (powertrain control module) will set the P0717 code when it detects no signal from the input/turbine speed sensor. This signal may be interrupted briefly, or it may be erratic or otherwise outside of expected manufacturer settings. In any of these cases, the PCM will record the code and turn on the Check Engine light.
The Diagnostic Trouble Code (DTC) P0717 is detected when TCM or ECM receives no signal from the sensor. Need more information on how to fix the P0717 code?
If you have a P0717 Input Turbine Speed Sensor Circuit No Signal trouble code, this post will help you understand what it is and how to fix it. The computer wants to know if the transmission is working properly. So it reads the speed of the input shaft and compares it to the speed of the output shaft.
Is there a problem with the p0748 OBD-II trouble code?
Although generic, the exact repair steps may vary depending on year, make, model and powertrain configuration. When the P0748 OBD-II trouble code is set, the Powertrain Control Module (PCM) has detected a problem with the Transmission Pressure Control Solenoid “A”.
The PCM (powertrain control module) will set the P0717 code when it detects no signal from the input/turbine speed sensor. This signal may be interrupted briefly, or it may be erratic or otherwise outside of expected manufacturer settings. In any of these cases, the PCM will record the code and turn on the Check Engine light.
Causes for this P0748 transmission code may include: 1 Defective Pressure Control Solenoid 2 Dirty or contaminated fluid 3 Dirty or clogged transmission filter 4 Defective Transmission Pump 5 Defective Transmission Valve Body 6 Restricted hydraulic passages 7 Corroded or damaged connector 8 Faulty or damaged wiring 9 Faulty PCM
Why does my transmission have a hard shifting problem?
You would be surprised to know that the majority of the transmissions problems such as hard shifting and no shifting issues come from incorrect transmission fluid level or the infamous transmission 13 pin connector plug O-ring. These are easy fixes that you can even tackle yourself.
What can cause a transmission solenoid to slip?
If the fluid is low, worn out, or has burned, you should consider getting a fluid flush. Take of the transmission fluid and your transmission will operate for a really long time. A defective solenoid can cause the transmission to slip. What’s a transmission solenoid?
What does it mean when your transmission is slipping?
Transmission slipping does not always mean your transmission is going to fail, but it is a signal that maintenance is required. Because your car’s transmission is one of its most complicated systems, it is important to accurately diagnose the cause of the symptoms. If your transmission is slipping, be aware of the signs.